Introduction: Make Denim Belts With Pockets With Your Old Jeans
More by the author:
About: I breathe new life into old clothes by upcycling thrifted finds into new garments. It's possible to be fashionable and sustainably responsible on a small budget. I am happiest when I am sewing and working with…
Learn how to transform your old jeans into fashionable denim belts with pockets. Read on or watch the video.
Supplies
Jeans
Thread
Step 1: Read on or Watch the Video
Watch the video for step by step instructions.
Step 2: Remove the Belt Tabs and Waistband
Cut out the waistband along the bottom edge.
Step 3: Cut Out the Pockets With a 5" Panel Below the Pocket and 1/2" Seam Allowance at the Top
Step 4: Cut 3/8" Fringe Below the Pockets
Step 5: Make Larger Fringe
Cut 12" panels from the legs and mark a 1/2" seam allowance at the top. Cut 3/8" fringe up to the seam allowance
Step 6: Sew the Waistband and Pockets to the Waistband
Lay out the fringe and pockets. I overlapped the fringe with the outer edge of the pocket by 2 inches. Sew everything together at the bottom edge of the waistband.
Step 7: Enjoy Your New Belt!
The back of this belt is just as stunning as the front. Be prepared for lots of compliments!
For more upcycling and sewing projects, check out my blog at Pivot Point Patterns.
Participated in the
Repair and Reuse Contest
