Introduction: Mini Knex Bow

By

This Knex bow is great. It's powerful, small, and only uses 4 pieces! Please feel free to mod it, but when you do, tell me. I want to try it out!

Step 1: What You Will Need

You will need:
Assembly
1 rubber band (I used a #33, but whatever works is good.)
2 orange connectors
2 white rods
Ammunition
1 gray rod or whatever works (not shown)

Step 2: Assembly (part 1)

Put rubber band between orange connector prongs like so.

Step 3: Assembly (part 2)

Put white rod over rubber band and push until white rod is secure.

Step 4: Assembly (part 3)

Bring rubber band around back of orange connector and repeat part 2 on other side.

Step 5: Assembly (part 5)

Now loop excess rubber band around back and bring over white rod so it looks like this. (I flipped it around backwards.)

Step 6: Firing

Put rod (I used a gray one) through center hole and put rubber band on the end. Pull it back and let go to fire. Enjoy!