Introduction: Newly Designed Catapult Mark-1
This catapult looks different from most but dont underestimate it.It shot balls of tac around 25ft across a room without rubber bands.
Step 1: The Pieces
5 gray spacers and 1 blue spacer
7 red rods
4 blue rods
7 white rods
1 dark blue rod
2 purple connectors
4 red connectors
4 green connectors
2 small black connectors
2 yellow rods
Step 2: The Legs
Make two of the leg sets and then put them aside.
Step 3: The Arm
Make this it should be very easy if you look at the picture below then put it aside.
Step 4: Put the Arm Together
Alright now put the arm on the yellow rod as bellow then add the necesary spacers on each side.then put purple spacers on the end.
Step 5: Now for the Stopping Arms
Okay now build this.
Step 6: Time to Put It All Together
Time to take all the pieces you made then setaside to make the catapult.to make it please refer down to the picture.
Step 7: How to Fire
You can fire this by pushing down on the blue rod as hard as you want.
Step 8: Have Fun
Hey private message me if you dont get something or you want mods cause i have a few mods for it to shoot farther and faster and a few other mods see ya have fun.