Introduction: RSGL-81v1.9 (Knex Grenade Launcher)
Here are the instructions for my knex grenade launcher and entry for Round 1 of TGKT.
Step 1: Piece Count
Here is the piece count (including ammo).
Rods
Grey - 9Red - 50
Yellow - 23
Blue - 83
White - 100
Green - 99
Connectors
White - 5Blue - 54
Yellow - 107 (2 are orange with thing on top)
Purple - 7
Green - 11
Red - 26
Orange - 60
Light Gray - 3
Dark Gray - 40
Other
Y-Clips - 34End Caps - 4
Grey Spacers - 24
Blue Spacers - 32
Tiny Wheels - 4
Grey Gears - 2
Ball Sockets (Part that the ball goes into) - 2
Step 2: Upper Barrel
1-5:Make
Step 3: Lower Barrel
1-6: Make
Step 4: Supports
1:Make
2:Make
3-5:Make
Step 5: Handle and Trigger
Credit to Viccie.B1993 for the trigger
1-5:Make
6-8:Make
9-10:Connect
Step 6: Stock
1:Make
2-3:Make
4-5:Make
6-7:Make
8-9:Make
10:Connect
11:Connect
12:Connect
13-14:Connect
15:Connect
Step 7: Bipod
1:Make
2:Make
3-4:Make
5:Connect
6:Connect
7:Connect
Step 8: Scope
1-2:Make
Step 9: Grenade
1:Make
2:Make
3:Connect
Step 10: Assembly
1:What you should have
2-3:Upper Barrel + Lower Barrel
4:Scope + Upper Barrel
5:Support + Barrel
6-7:Support + Barrel
8-9:Trigger and Handle + Barrel
10:Support + Lower Barrel
11-13:Stock
14-15:How to add the bi pod
Step 11: Rubber Bands and How to Use
1:You need 1-3 chains of 4 and one single rubber band.
2:Main rubber bands
3:Trigger rubber band
4:Pull rubber bands back to white wheel
5:Insert Grenade
6:FIRE!