Repairing and Reinforcing STREAMLINE Darts.

This instructable will teach you how to reinforce and repair Streamline darts. As you probably know, the N-Strike Longshot Cs-6 jam ALOT. and everytime it happens, darts get damaged, therefore jamming happens more frequently. Here is how it works.

Step 1: What You Need

1. N-Strike Longshot CS-6
2. STREAMLINE Darts
3. Scotch tape
4. Common sense

Step 2: Reinforcing

wrap tape around where the foam and rubber meet, don't let any tape touch the rubber. Wrap around securely so there isnt any wrinkles but not too tight, as this may cause a problem with inserting ammo into the cartridge. What the tape does is protect the front of the dart from the loading process. When you cock the gun, it inserts the dart into the barrel, sometimes, (particulary in jams) it catches the top of the barrel and either tears, bends, or just rips in half. It usually only rips with modded guns. The slick and smooth surface of the tape allows the dart to succesfully load everytime. :D

Step 3: Repairing

here's how to repair them. wrap tape around tears, serious wrinkles, or bends. DO NOT COVER DART COMPLETELY IN TAPE. If you do, the dart will be so smooth, it will pop right out of the ammo clip. Also, the extra weight will interfere with flight.