Introduction: Super Sniper Knex Target
Do you want a knex target that swings when you hit it? Are you too pro of a sniper for other targets? then try my new Super Sniper Target! Its Simple AND effective!
Step 1: Make the Base
For the base you will need 6 grey rods, 2 red or grey connectors and 8 purple or silver snap together connectors. assemble as shown.
Step 2: Make the Axle
For the axle you will need 2 red or green rods, 16 grey spacers, 2 white or black snowflake connectors, 1 orange or brown connector and 2 tan or dark tan cap connectors( use them after you assemble the whole thing. Assemble as shown
Step 3: Make the Target and Counterweight
These are to be added to the snowflake connectors on the axle. They are made with 4 snowflake connectors, 10 green or black rods, 4 blue or silvery blue rods, 4 white or silver rods, 8 purple or silver snap together connectors and 6 red or grey connectors. Assemble as shown.
Step 4: Put It All Together!
Put the targets on the axle and then put the axle on the base. after putting the axle on, then attach the 2 tan clips on the outside ends of the axle as shown. Now aim at the top and watch it swing!