In the video Robbie the Robot Lamp Demonstrates how to Fly The Ascender!

Here is a nice, simple paper airplane anyone can make.

Here is a link to print off some directions and template

http://www.theonlinepaperairplanemuseum.com/OPAMAscender/OPAM2ASCENDER.doc

Grab some paper and have some fun!

For over 800 FREE paper airplane designs, check out my site at

http://www.theonlinepaperairplanemuseum.com

Step 1: Step 1

Start with a copy of the plane, a scissors and a roll of clear tape.

Step 2: Step 2

Fold the top of the paper down to the center line, and give it a good crease.

Step 3: Step 3

Fold the left corner over to the vertical center line, and crease.

Step 4: Step 4

Fold the right corner over to the vertical center line, and crease.

Step 5: Step 5

Fold the top triangle down along the center line.

Step 6: Step 6

Fold the left side over to and even with the right side.

Step 7: Step 7

Cut out the "X" areas as shown, and recycle the scraps.

Step 8: Step 8

Fold the top wing and tail to the left as shown.

Step 9: Step 9

Flip over and fold the wing and tail to the right on the other side.

Step 10: Step 10

Tape the nose closed.

Step 11: Step 11

Pop the wings up a little, and throw it with a slight downwards angle, and watch The Ascender scale to new heights!

_

For Over 800 FREE paper airplane designs, check out my website at

http://www.theonlinepaperairplanemuseum.com