Instructables

4 way spekaers. is the xover schematic correct?

My supplies
A Tweeter with a frequency response of 20 KHz ~ 40 KHz, 8Ohms, 75Watts RMS/3000Watts Max, and Sensitivity of 105dB.
A 4” Subwoofer with frequency response of 25Hz ~ 160Hz, 4Ohms and 25 Watts RMS
Two 4” Full Range Speakers of 4Ohms and 5 Watt RMS

Is the schematic mentioned in the pic is a suitable xover for my system
please clear the nearest values to me


Picture of 4 way spekaers. is the xover schematic correct?
Looks fine.

As for the nearest value go with what you can find. Check major parts suppliers like Mouser and see if you can get the exact values.