loading

EV3?

I just made the EV3 rubiks cube solver and i am wondering why mine takes a long time to scan compared to https://www.youtube.com/watch?feature=player_embedded&v=MQvG6IgrgYQ

sort by: active | newest | oldest
iceng2 years ago

Detail pictures of your solver are a great help.

ben2000 (author)  iceng2 years ago
So, yesterday I managed to update the firmware and that seemed to fix the slow scanning. But now every time I try the scan the EV3 brick says. " scan error ". The cube is about 55mms edge to edge and there is a fair amount of play between the cube and turntable...any help would be greatly appreciated thanks
iceng ben20002 years ago

Progress is good :) .................. READ MY LIPS :0

Can't really help with INVISIBLE machines !!

ben2000 (author)  iceng2 years ago

Hopefully this helps (;

IMG_0786.JPGIMG_0785.JPGIMG_0784.JPGIMG_0783.JPGIMG_0782.JPGIMG_0781.JPGIMG_0783.JPG
MVI_0787.MOV(516x290) 22 KB
ben2000 (author)  iceng2 years ago
So, yesterday I managed to update the firmware and that seemed to fix the slow scanning. But now every time I try the scan the EV3 brick says. " scan error ". The cube is about 55mms edge to edge and there is a fair amount of play between the cube and turntable...any help would be greatly appreciated thanks

You need to update your firmware for the brick. Version 1.06H should do the trick here:

http://esd.lego.com.edgesuite.net/digitaldelivery/...

Happy cubing!