Home made cap charger?

I need advice on how to make a capacitor charger. I know somebody is going to say camera charging circuit but i have one and it doesnt make the cut. I am planning on getting some transformers from wall bugs and old alarm clocks. but i need to know how to wire them and make them work with a DC input and an AC output. I need it to be at least 500 volts output

Comments

[Re-design]

Google "voltage doubler" or "high voltage power supply schematic'

If you're charging a capacitor you want dc out not ac.

To get very high voltage from dc you need an oscillator or "chopper" that makes ac or choppy dc out of the pure dc from your battery.

Then the "ladder" of the voltage doubling circuit works to raise the voltage much higher.  In the end you end up with high voltage low amperage dc.

[seandogue]

(removed by author or community request)

[budhaztm]

I admire the fact that your an engineer, that us what I'm aiming for. But I know the dangers of this project and I just need to learn how to build this. I know these can and will kill, I've almost hurt myself seriously by doing things wrong.
And no offense taken

[Kante Tech]

There is instructables on here about a mini tazer made from camera parts you can build off that in order to make the charger

[budhaztm]

plus, i dont want to use a camera, i already have used 4 of them and they dont cut it

[budhaztm]

im more looking for a direct explanation on how to make a charger, theres too many 'ibles on tazers to sort through them all