loading

How can i "hide" our electrical cords? They are out in the open, our baby keeps getting to them. Any good ideas? Help!


sort by: active | newest | oldest
Vyger5 years ago
Having cords around could start the little one off on a course of great learning. I learned a lot from the unprotected electrical things that surrounded me when little. I still remember my first truly electrifying experience when I stuck a little curious finger in between the contacts of a plugged in radio. And then there was the time when I tried to magnetize a paper clip by dropping it across the contacts. A beautiful shower of sparks and noise followed by a "Now what did you do!!!" from my mom, who was now in the dark and which made for my discreet escape. And then there was the hanging lamp from the ceiling that was really fun to wind up and let it spin around. Until one day when the cord wore out, shorted out and burned the wire up and of course broke the glass lamp on the floor when it came down. I tried to break its fall with my head but was unsuccessful. Later in life I learned to be a little more careful but I still had accidents. I mean how was I to know that when you string those little copper wires from cords, between nails a foot apart and then plug them into the wall that the copper wire would turn into little molten balls of metal and burn through things like sheets and carpets. But at least the lights only flickered and apart from the burning smell it was hard to tell what kind of success my experiment really had.
Kids learn not to mess with cords. I mean, when they get unplugged you end up in the dark. And after about 100 times of being told not to play with them it starts to sink in. The far bigger problem is dogs and cords. They just never learn.
When it gets super cold here we use engine block heaters to keep the car engines warm enough to start. Many times one winter I went out to start the car and found that the stupid dog had not just unplugged the extension cord but had actually chewed it up. I had to keep cutting out sections that had been destroyed. And this was a live cord. Stupid dog apparently thought it was attacking him so he got into fights with it. I kept expecting to find him dead one morning but instead somebody stole him. How do I know they stole him? His 30 foot tie out chain disappeared with him.

So anyway, back to your problem, keeping cords short will help but really the best thing is training children not to play with them. In the age of childproofing that is probably not the accepted advice but in reality its better to child proof the child rather than the whole world. Condition them and train them that things are dangerous and some things they need to not touch. It's better for them to know and understand that some things are dangerous and off limits not just at your house but everywhere. That is real childproofing in my opinion. I survived.

Now for a true challenge, how to keep your cat from walking on your keyboard.

BY the way the stuff in the picture that Canucksgirl shows looks like surface conduit. It is used in places that it is not possible to run wires in the walls. It is a little heavy duty for what you would need. There is a plastic channel stuff that is used for running network cables and phone lines. It has a sticky backing so it is really easy to stick to walls and moldings. As far as on a carpet, they have heavy rubber channeling that is made to keep people from tripping on wires. Most offices and public buildings use it. You have probably seen it hundreds of times.
But all of that will not keep a child,or a baby, from playing with plugs in the wall. A slap on the hand and a no, don't touch will though.
Reading this was pure entertainment Vyger! LOL ;)

Btw, the stuff I referenced is the same plastic channel you talked about. It comes in either a sticky back or with a screw on plate that the channel cover snaps into (at least that's what's available here).

Anyways, I do agree with you about teaching a baby not to touch stuff. I went through all that with my son, and like you said, since you can't baby proof the entire world, its best to teach them asap.
rickharris5 years ago
Duct tape the baby to the wall it's easier - (just joking of course!)
canucksgirl5 years ago
You can buy a product called a "wire hider". It's sold in most home improvement stores (like Home Depot). Its a channel that you can run wires through and hide them. The channel can be attached along the baseboard of a wall, down a desk, or even along a floor. They aren't very expensive, you can attach as many channel lengths together as needed, and they do a good job of keeping the cords out of baby's reach.

Here's a sample of it (By Safety First). 

And here's a sample image of it in use. (They also sell corner pieces etc).
sample.jpg
Well without more details or pictures of where they are at, its hard to tell you what kind of options you may have.

The best thing you can do is keep an eye on the kid or coral them where they can't get to the cords. Keep them busy with other things so they don't go near the cords.
r49417 (author)  mpilchfamily5 years ago
Well i cant put a picture up, but it is close to a wall. Its the back of the moniter. Theh r hanging, so im not quite sure if tape will work. The room is carpeted too. The cords r black, so easy to see. The moniter is on a desk wide open, so the baby can crawl right through.
thegeeke r494175 years ago
That's why I suggested Gaff tape. Unless you have extraordinarily thin paint on your walls, gaff tape will generally not harm you wall when comming off. It is generally black, so it also will be easy to see, but the only other option that I can think of is what frollard suggested.
frollard5 years ago
Feed all the cables into a sheath, available at most hardware stores;

Looks like: http://image.made-in-china.com/2f0j00yCRQrJSqCucY/Cable-Management-ECM-01-.jpg

it slots open on the sides and allows you to add all your cables, then you only have one big cord to deal with - which can be easier tucked away.
Similar product:

http://www.canadacomputers.com/product_info.php?item_id=037333
thegeeke5 years ago
Run them along the wall, and then use Gaffers tape to tape them down. Run them behind furniture, etc.