How do i make a Stirling cycle cooler?

I would like to thank the following users for their help: Kiteman, The Skinnerz, steveastrouk, rickharris, Vyger, AndyGadget, iceng.
   I would like give a special thanks to "steveastrouk " for telling me to find old papers and work from the first cryocoolers.
   I also found out that these are relatively cheap (compared to the other cryocooler systems).
   What do i need on building this?
   Can everyone give me a help on this?
   Thank you :D

sort by: active | newest | oldest
rickharris5 years ago
Do you have access to a very well equipped machine shop?

Do you have the skills to manufacture to a very close tolerance?

Do you have a budget to implement these things

If the answer to ALL these is YES

Look here

Otherwise the answer is you can't do it.
PRETTY machines. "3-6%" COP @ 80K....
jamesc4 (author)  steveastrouk5 years ago
Yes, they are pretty machines :P
Look good - The information the OP wants is in there.
jamesc4 (author)  rickharris5 years ago
Hello guys.
Once again, thank you for the help. I didn't answer right away because i was waiting for other people's comments.
I have a +- Budget and a skill to manufacture this.
The problem is that i don't understand the concept of this.
You need a good machine shop - exactly what the old guys had.
jamesc4 (author)  steveastrouk5 years ago
Yes, they didn't had the technology but they were able to prove how things work.
A congratulations to them ;)
jamesc4 (author) 5 years ago
The objective os this Stirling cycle cooler is to turn oxygen, hydrogen and nitrogen liquid