loading

How to make a laser out of these components?

So, up to now i have gathered a Phr-803t sled, which most of the laser enthusiasts are familiar with, a laser housing for 405nm laser diodes( http://www.o-like.com/index.php?main_page=product_info&cPath=4&products_id=23 ), and a laser diode driver again from o-like ( http://www.o-like.com/index.php?main_page=product_info&products_id=93 ).
Can i make a laser using these components and if so, how can this be done?

Thanks in advance.


Well, the diode drives the design, not the driver. If you HAVE a diode that runs on 4.8V at 1.1 Amps, this setup is for you

Steve
Well, now you need a laser diode !
deathnoteviewer (author)  steveastrouk6 years ago
Well, i have the laser diode(it's inside the sled) but i don't know how to put this all together, and since most of the laser builds use the aixiz module i have no idea how to all these things together( i have an o-like module).