Instructables
loading
loading

Im trying to find the 0v HV pinout of my flyback yet i dont have access to an ohm/ voltage meter.I dont know what to do

. the model is a sampo FEC061 pulled from an old toshiba CRT monitor. thanks greatly to any one who can help it is much appreciated.

sort by: active | newest | oldest
Plasmana5 years ago
The quick and easy to find the ground pin of the flyback transformer is to power up your flyback (assuming you have a driver) and bring the HV wire close to the pins - The pin that the arc is most attracted to is the ground pin. That is how I normaly do it :)
hassanH17 months ago

when put 0v to pin 8 the voltag is 9.4

is this right or no

hassanH17 months ago

when put 0v to pin 8 the voltag is 9.4

is this right or no

seandogue5 years ago
I would be loath to consider fiddling around inside a tv without some form of DMM/voltmeter.

Here's my overtly parental advise. Do nothing until you have proper equipment. 
blacjack1 (author)  seandogue5 years ago
yeah, your probably right, its just that I am lacking the necessary funds right now to buy one, after all im just a standard yr 12 high school student
fwiw, a dmm can be purchased for less than $20
blacjack1 (author) 5 years ago
thankyou everyone for the help it is greatly appreciated
How to find the primary and the secundary coils of a FlyBack transformer: http://jnaudin.free.fr/lifters/labhvps/tht.htm
blacjack1 (author)  Jack A Lopez5 years ago
thanks for the site but i dont have access to an ohm meter