ANSWERS : Play

I was wondering if anybody could help me make an RC knex car this is what i have i have 100 to 150 knex, one 49mhz RC controller and reviver i also have some RC car tires. P.S. the car reviver is from a New Bright RC car.Also i have no cyber knex motors i have a good amount of reagular knex motors most are the green ones also have a good amount of wire.

Comments

[aeronut01]

I know this thread is pretty much dead, but if you're still interested, you'll need to know where the old drive motor of the New Bright rc car attached. Bust out your screwdriver and open a knex motor up. You'll find a switch (not needed, and neither is the battery housing, where the batteries for the knex motor used to go), an electric motor, and some gears that reduce the speed. Get rid of the switch and old battery housing. Solder or somehow attach two wires to the little electric motor, one on each terminal. Thread the wires out of the case, and close the knex motor up. Connect the new motor wires you attached to the spot on the receiver where the old drive motor used to go. Now your knex motor will be powered and controlled by the receiver.

[KnexFreak360]

No motor?

[slimshaddy]

yeah i have knex motors and rc car motors got any ideas

[KnexFreak360]

Provide some picture and maybe i can!

[slimshaddy]

i just need an idea for a car or truck with steering

[KnexFreak360]

Go Here!

http://www.instructables.com/id/Knex-EDF-powered-RC-car/

[slimshaddy]

k but i dont have any way to make one of the motors i have to work in that car.

[KnexFreak360]

O well im out of ideas but , believe it or not i had the same idea.

[slimshaddy]

i can use that car but i just kneed an idea for the motor

[KnexFreak360]

oh

[slimshaddy]

have any ideas?

[KnexFreak360]

nah

[slimshaddy]

ooh do you think any other person on instructables would have any ideas?

[KnexFreak360]

i dont know

[slimshaddy]

ooh