Why do I get a voltage drop from my solar panels....?
I am building my own solar panels and installing them as I go. So far I have mounted three 70 watt panels. I have a twenty amp controller and a 1500 watt pure sine wave inverter. With the array switched on and connected to the batteries (8 x12 volt 134AH) via the controller everything seems fine with a steady 13 -14 volt charge coming through. But when I connect the inverter the PV volts drop to around six and seven volts....The batteries are wired in parrale but not directly to each other. Instead I connected them to a buss bar hoping for equel drain and charge... I then connected the wires from controller and inverter to the bars... I thought this may have been the problem so swapped them all around having the controller wires to the battteries, then the inverter directly to the batteries... It made no difference and the voltages remained the same....I am hoping now that the reason maybe that I do not have enough panels to power the system and as I add more panels the voltage will rise...... l Any thoughts on this will be very welcome.....?