Sorry for the extremely braggy title, I just needed something to grab attention, because these mods are MANDATORY.

I have made some mods to the bolt, ram and barrel that are required for my AR-4 v3

Picture 1- Ram mod.  Add these spacers in there.  This keeps the ram from breaking the bolt when you fire.

Picture 2- Bolt mod.  I change the number of 1- slot connectors that hold the bolt from 2 to 3.  I also mod the ram so that the part that goes before the bolt is 1 orange connector, and 2 blue caps.

Picture 3- 2 barrel mods.  There is a third mod, but I will go ahead and explain this first.  The top of the barrel is changed a little bit.  Note it.  

The second barrel mod was actually made by makers of my AR-4 v3.  It required  me to remove the white connector from the front of the barrel.  This somehow increases the power to a staggering 45 feet with 1 rubberband, around 70 with 3 (doubled up), making this the most powerful bolt action gun ever posted.

Picture 4- Bullet lock mod.  Sorry for the crappy picture, but it has too much shadow.  Anyways, where the new ram sticks out, you place the ball joint socket.  This also increases the power, and gives you the ability to point it down.

With all the mods I made, you can load and fire the gun sideways.