Instructables is going to be at the UK Makers Faire!
Instructables will be showcasing at this years upcoming Makers Faire UK in Newcastle! We have lots of goodies to hand out, and will have some projects on show for people to enjoy.
I will be joined by,
SteveAstroUK
LizzyAstro
Jayefuu
PKM
Kiteman
Kitewife
Rainbow_Han
Last years Makers Faire was a lot of fun, I very much recommend it. I am delighted that we will have our own instructables stall this year.
We very much look forward to seeing you at the faire, and be sure to let us know if you are a fellow instructablian.
Jake
- gmjhowe
-
Maker Faire UK 12-13 March 2011
The world-famous Maker Faire returns to the UK to headline Newcastle ScienceFest.
Expect a weekend of cool robots, garden-shed inventions, knitted wonders, the occasional fireball
and oodles of opportunities to make your own creations. Perfect for creative people of all ages!
At Maker Faire, come and play with classic synthesizers, see live 3D printing, learn to solder, play musical Tesla coils, become a Guerrilla knitter, turn a beer can into a pinhole camera, use a Wii balance board to control a robot, make your own stop-motion movie and much more…
This special event takes place simultaneously at Centre for Life and Discovery Museum with one Access-All-Areas ticket available. This ticket enables you to see all of Maker Faire plus Life’s planetarium, motion simulator ride and brand-new under 7’s gallery.
Tickets are available on the day or in advance.
Opening hours:
Saturday: 10.00 to 17.00
Sunday: 11.00 to 17.00
Head over to the Maker Faire UK website for more information.
I will be joined by,
SteveAstroUK
LizzyAstro
Jayefuu
PKM
Kiteman
Kitewife
Rainbow_Han
Last years Makers Faire was a lot of fun, I very much recommend it. I am delighted that we will have our own instructables stall this year.
We very much look forward to seeing you at the faire, and be sure to let us know if you are a fellow instructablian.
Jake
- gmjhowe
-
Maker Faire UK 12-13 March 2011
The world-famous Maker Faire returns to the UK to headline Newcastle ScienceFest.
Expect a weekend of cool robots, garden-shed inventions, knitted wonders, the occasional fireball
and oodles of opportunities to make your own creations. Perfect for creative people of all ages!
At Maker Faire, come and play with classic synthesizers, see live 3D printing, learn to solder, play musical Tesla coils, become a Guerrilla knitter, turn a beer can into a pinhole camera, use a Wii balance board to control a robot, make your own stop-motion movie and much more…
This special event takes place simultaneously at Centre for Life and Discovery Museum with one Access-All-Areas ticket available. This ticket enables you to see all of Maker Faire plus Life’s planetarium, motion simulator ride and brand-new under 7’s gallery.
Tickets are available on the day or in advance.
Opening hours:
Saturday: 10.00 to 17.00
Sunday: 11.00 to 17.00
Head over to the Maker Faire UK website for more information.
13
comments
|
Add Comment
|
sort by:
active |
newest |
oldest
...and don't forget the younger contingent will be there too!
We will only have enough room for the people! Let alone card!
Yes! An excuse!
I think the smallest Kite & Astro were planning something... large.
I think the smallest Kite & Astro were planning something... large.
They think that larger than them is large, luckily they are both quite small :-)
Will those be t-shirts, to sell?
Hmph... They didn't sell t-shirts at the NYC Maker Faire...
Hmph... They didn't sell t-shirts at the NYC Maker Faire...
I believe they are T-shirts for the stall staffers to wear (selling stuff is not allowed in most parts of the Faire).
Correct! I got HQ to send over some of the new t-shirts for us to wear, so we stand out from the crowd.
that should be the instructables business card handouts. They feature an ible on one side.
And there's more!
Kitewife will be announcing a new pattern at the stall as well!
Kitewife will be announcing a new pattern at the stall as well!
I'm writing a special Instructable, to be revealed at the Faire.
If I get things together quickly enough, I'll have a relevant freebie to give away.
If I get things together quickly enough, I'll have a relevant freebie to give away.
 |
Vancouver Mini Maker Faire 2012
Rebuilding NordicTrack ski machine drive rollers
Looking for New Zealand-based Instructables authors for conference on August 27 in Wellington
Call to makers - Brighton Mini Maker Faire
Milk Crates - not as green as you think
TEDxBaghdad - Iraq - violence, dust storms and open sourced manufacturing
UK Mini Maker Faire - The Derby Silk Mill - New Poster to Share!
