loading

Laptop LCD Cold Cathode re-use

So recently, an old laptop of mine died. It was an old dinosaur of a laptop, slowly running down the remaining years of its life. Then it died. So sad. To honor its death I dismantled it. I got an interesting motherboard, some decent speakers, a 5gb harddrive along with a floppy and disk drive. What really interested me the most though is the LCD screen. At first I hoped that I could re-used the screen as a tertiary screen for my desktop, but later I realized the near-impossibility of this task and gave it up. Instead I chose to take the screen apart for its cold cathode lamp. It's almost 12 inches in length, and very thin. Before the motherboard died, the LCD back light was still working. So I wanted to take it out, along with its inverter, to attempt to re-use it. Soon after doing this I saw a problem in my plans: the input of the inverter is a whopping nine wires. This is a bit more than I'm used to dealing with for power supplies. I was wondering if you guys knew any way that I could go around this?
At request I can most more pictures and model number of the inverter in case you can't read it in the photo.

tl;dr - Cold cathode inverter in picture. output is two wires, input 9 wires. How do I use this

Picture of Laptop LCD Cold Cathode re-use
CIMG7406[1].JPG