Instructables

My Month at Instructables as an Artist in Residence

It's easy to see Instructables as a single entity who's persona is summed up in one yellow robot. During the month of November I had the good fortune to spend a month as an Artist in Residence at Instructables HQ and had the opportunity to look behind the yellow curtain and learn more about the people who craft the website and the work that they do. During my stay I met artists and technicians, crafters and programmers, and I was allowed to peek into their world and see the inner cogs whirling away. Oh yeah, I was also let loose with a million dollars worth of 3D printers and laser cutters with no more direction than to have fun and make stuff!

Day to day life at the office was not what I expected. Before arriving I had envisioned a, well, a madhouse. I figured that there would be 10 ft cardboard robots beeping away in one corner, office supply archery in the other, and paper airplanes gliding over the top of it all. When inside though I didn't find a room of chaos, but a room of people quietly working. I soon found out that between community management, site development, contests and other site duties there is a massive amount of work that goes into making the Instructables DIY hub function. It wasn't all business though, there was certainly time for liquid nitrogen ice cream, communal lunch hours, and pizza Thursday!

Some stuff I found on the ground in San Fransisco I am very much a robot / tech person, so one of the highlights of my visit was getting to talk shop with randofo and amandaghassaei, Instructables technology editors. They had the coolest gadgets, and both fit the role of tinkers perfectly. Randofo had a huge bin of motors, gearboxes and other electrical delights that he patiently let me riffle through, and Amanda's work area was mass of dismantled keyboards, wire and test equipment. They practiced a type of electronics where novelty is the main function, and it was amazingly fun to see their projects come together.

And yes, of course, the 3D printers were a blast. I really was allowed to dive in and try anything I wanted with the Objet machines so I took every spare moment working with them. I spent a fair amount of time running test prints of the different materials and testing their physical and mechanical strength, (aka breaking them). Once I had a feel for the UV cure pseudo plastic, I had just enough time to print everything I wanted plus some. I should also mention that this same building had two of the fastest laser cutters I've seen, and all the plastic and cardboard I could possibly need for my scale of projects. I can't possibly relate how liberating it felt to be able to think of an idea, draw up the CAD, and have a working prototype in less than an hour.

The Instructables office is found on a busy street of San Fransisco, above a deli and a bar that plays full Talking Heads albums. This was my first time in California and I loved every minute of it. There was this creative energy all about and it seemed that there was some kind of art plastered anywhere it could fit. I felt like I was on an expedition, seeing for the first time things that I had only read about; I saw subway performers, photographers, and a silver painted robot guy. I ate at a Kwik Way and bought guitar string from the store that the Mythbusters bought their trumpets from. Not only that, but there are celebrities in California and I'm almost positive that Elton John rode the same bus as me every day. I could be wrong, but he had these huge glasses and the hair cut and everything. (I've never seen a celebrity before.)

I visited California for a month but it felt like it flew by in minutes. After giving a small presentation over a Thai lunch and a short goodbye, I left San Fransisco and Instructables with a greater awareness and appreciation of the creative community and the talents of its members. Visiting the office and meeting the Instructables crew was an unforgettable experience and I hope to visit again someday. I would highly recommend the AIR program to any one in the position to participate, I had the time of my life.

WOOOOOOOOOW!!! Now that's a great chronicle! I can't wait for my time to come! Congratulations Tom!!!!
Kiteman1 year ago
I absolutely, and unreservedly agree with the last paragraph.
It would be nice to announce who are currently the AIR apparents or in line. The commonfolk only get the post mortem report. Maybe a mention on the homepage somewhere to feature their work. Published ibles just get featured in the mix and not really showcased that they are the work of the AIR.
Agreed, although you can watch the AiR group to see what projects have been made.
There's a group for that? I never knew.
Groups are really way too hard to find on this site!
Is there any way to "fav" this group since it doesn't appear to accept community membership?
I'm afraid membership is limited to AiRs.

I'm posting from an iPod right now, so it's a pain to check, but I think there are RSS feeds?
Ah, yes, there seems to be one - look to the top-right-ish if the page, a button that looks like a wifi icon. I think that's it.
Agreed, especially since the search got restricted to instructables/forum topics/answers.

the search got restricted to instructables/forum topics/answers.

Oh. :-/
So how is anyone supposed to know about groups? I can't find a way to get to them, except for the 'groups' link on my own profile, which takes me to the two groups I'm a member of.

Shouldn't there be a general page for groups, which shows the different categories and allows you to browse or search for a group?
Maybe there is such a page. Who knows.

If there were such a page, it might be nice if it were linked from the 'Community' menu.

Also, when I'm logged into an account which is the manager of a group, I can't find a way to get to the page where I can manage that group. I'm starting to think this needs to be its own post, in Feedback...

Tomdf (author)  Kiteman1 year ago
Maybe a short square on the AIR group page, a quick bio and links to the current resident or something.

Kiteman, I somehow got it in my head that you worked there. I was disappointed when I realized I wouldn't get a chance meet you. I did get to play with your coin maze though, and I think I saw part of the wave machine.
Kiteman Tomdf1 year ago
That's a mix-up a lot if people make.

We did meet, for a few moments, when you popped into the office in August. You've got some mighty fine projects.
ynze Kiteman1 year ago
The Air program is one of the good things that came with the Autodesk merge, is it?
Tomdf (author)  ynze1 year ago
I did get to rub elbows with quite a few Autodesk people, and the printers were in an Autodesk annex. From my perspective, it's a very good thing!
bajablue1 year ago
Delightful parable! I enjoyed every single word!!!
Tomdf (author)  bajablue1 year ago
Why thank you, it was an absolutely fantastic experience.
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!