Instructables

New Horizontal Mag Gun + Unfinished repeating sling

Here's a video of my new gun I'm working on, and some pictures of a new repeating sling that I scrapped.


Picture of New Horizontal Mag Gun + Unfinished repeating sling
DSC01807.JPG
DSC01808.JPG
I love the mag idea, but wouldn't it be better if you inverted it, so the mag walls stay on the gun and just the top of the mag come off instead, this means it would be easier to reload.
jollex (author)  TheFoofinator3 years ago
This way, you can have pre-prepared mags so you don't have to manually load the gun a bullet at a time.
Do the bullets not fall out the bottom of the mag?
jollex (author)  TheFoofinator3 years ago
No, the friction from the side walls of the mag keeps them in.
Just a question, in order for the bullets to chamber, do you have to push the mag pusher yourself to load the next round in?
jollex (author)  TheFoofinator3 years ago
Depends, sometimes you do depending on the strength of the rubber band. You need a perfectly balanced rubber band for the mag pusher, if it's too strong, the bullets will all fly out of the mag but if it's too weak, they won't come out of the mag at all.
I see. I made it, it is great! I made a new trigger, another pin guide, and a bunch of other mods. I'll get a topic up asap but not now because its really late here.
K. Thought the ammo was white rods that's why.
MegaMetal83 years ago
Im 99/100 gonna build.

But, how many cut white rods/ broken pieces do you need?
jollex (author)  MegaMetal83 years ago
Uh 4 cut white rods and 1 end cut piece I think. You can get all of them from one bendy rod or grey rod.
Ok thanks
evilpooh3 years ago
Just finished building the "v2" (the one from the second video) and its quite nice. Its a lot of fun 5*

I do have an issue though, sometimes when i pull the trigger nothing happens and it takes 3+ trigger pulls before it fires (2 #64s on the ram).
jollex (author)  evilpooh3 years ago
Pull the bottom red connector of the trigger instead of the top one, that should help. I need to make a new trogge anyway, this one isn't very good.
evilpooh jollex3 years ago
That's how I was doing it, i played with the ram guide a bit to keep the pin straighter and that seemed to help a lot. And does that mean you're still working on this gun? If so I can't wait to see it "truly" finished
jollex (author) 3 years ago
Hiyadudez3 years ago
Pretty epic, but KSC made a horizontal mag gun, but its still cool.
I made them before they were even cool. >_> [/attentionwhoring]
So did Kinetic.
jollex (author)  Hiyadudez3 years ago
What does that have to do with anything haha
chevy623 years ago
5* when finished could you make instructions because this thing in beast
jollex (author)  chevy623 years ago
I might, depending on how much range I can get out of it.
chevy62 jollex3 years ago
i don't care what kind of range it gets it looks aamazing
Same here!
~KGB~3 years ago
mag is epic =D
jollex (author)  ~KGB~3 years ago
Thanks.
~KGB~ jollex3 years ago
no prob
instruct393 years ago
the horizontal mag gun is so cool. definately post when you finish it.
jollex (author)  instruct393 years ago
Thanks, I might.
your welcome, ill be lookin forward to it if you decide to post!
I dig the mag =D
jollex (author)  beanieostrich3 years ago
Thanks.
No problem man =D You build good stuff =D
Make it modelled into a p90. Real ones have horizontal mags.
jollex (author)  Fred the evil puppet3 years ago
This does have a horizontal mag.
KILLERK3 years ago
looks great
jollex (author)  KILLERK3 years ago
Thanks man
Nice concept, I look forward to it being posted. 5*s.
jollex (author)  Raz1r Knex Bull3t3 years ago
Thanks.
MrRadicalEd3 years ago
Very very nice. You never explained how a round chambers, but I'm assuming it is similar to a zkar(variant).

At least( if I understand correctly ) your last shot wont be the weakest shot in this concept.. I can't wait to see the fleshed out model. Good Work!
jollex (author)  MrRadicalEd3 years ago
Yep, pretty similar to the ZKAR. Thanks.
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!