loading

New knex pump action idea

Ok, to start off, If you are wondering why I dont have a gun to demonstrate this concept, its because I just thought of this a few hours ago.

So anyways, I have an idea for a pump action concept. This idea would work like this

  • the rubberbands would be hooked onto the pump instead of the gun via Y connectors on the pump.
  • when the pump pulls the ram back, the rubberbands do not expand or contract
  • after the ram goes behind the trigger, the pump is pushed forward, expanding the bands and giving the gun its power
  • the pump hooks into a locking mechanism
  • the trigger is pulled, and either recoil or another mechanism hooked to the trigger unlocks the locking mechanism for the pump

The advantage of this over other pump action guns would be that the pump would be easy to pull back, no matter how many rubberbands are on the pump.

sort by: active | newest | oldest
1-10 of 22Next »
jollex7 years ago
All this would do is make it harder to use because it would be hard to push the pump forward instead of it being hard to pull the pump back.
DJ Radio (author)  jollex7 years ago
I can push objects forward easier than I can pull them back.
The Jamalam7 years ago
I have mod idea, I'll try.
DJ Radio (author)  The Jamalam7 years ago
mod?
Ministry of defence :P nah but I already have a new mech, I'll post at some point. brb, I'm gonna make it finished.
hmm interesting idea although you could have some trouble with the locking mechinism
DJ Radio (author)  Fred the Penguin7 years ago
ya.
meh what I can make is limited at the moment as I only have like 60 yellow connectors and 2 black rods
DJ Radio (author)  Fred the Penguin7 years ago
2 black rods is all you really need for an average knex gun, however the Knexsayer needs at least 9 to work decently.
In reality i have about 60 black rods but all but 2 are used on my mg along with about 2/3's of my other pieces
1-10 of 22Next »