Should I Post?
ok well i wanna know if i should post this true trigger pistol i made.
its a semi automatic rubberband gun. its pretty decent, and can hold as many small rbs as u want, but after about 12 rbs, it gets hard to load. so should i post?
and please rate
EDIT: i took most of the pics, and will get the instructions up ASAP, but that might be a while cuz im getting left 4 dead
today...
ANOTHER EDIT: i AM going 2 post wen i finish with the detachable mag idea that me and dunkis were talking about. it might be a while, but ill get it up
AGAIN, ANOTHER EDIT: i made the gun, i have all the pics except for the front of the barrel. i made it so it shoots pieces, but reloading takes a long time, so im just gonna post the rbg version, it is SLIGHTLY modified to have a longer barrel, and a slanted handle
PLEASE RATE
31
comments
|
Add Comment
|
sort by:
active |
newest |
oldest
i didnt really look at the date and he made me a tribute so i am looking at all his stuff :)
Jun 7, 2009. 5:22 AMcj81499
says:
post!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Jun 11, 2009. 10:57 AMstale56 (author)
says:
Sorry, I took most of the pictures, but then I destroyed it. BUT I have a new RBG (but its not my own mech.) and I just made a pump-action shotgun, I just need the handle, hopper, and stock. This think was destroyed.
Mar 22, 2009. 6:58 AMknex gun enthusiast
says:
is it s-auto (gasp that would be cool) or fully auto like all the other ones
Mar 25, 2009. 1:30 PMstale56 (author)
says:
but some are wretched single action pieces of poop, and others are just fully auto, were they just release everything at once...
Mar 22, 2009. 10:24 AMstale56 (author)
says:
semi auto, but i brokeded it. i made a new rbg with a true trigger, semiauto. it has an awesome stock and the same mech as http://www.instructables.com/id/mp5/ its is the exact same mech. but i made my own design for it. i might post pics soon.
Feb 20, 2009. 1:22 PMstale56 (author)
says:
i have alot of the pics of the gun shown, but i modded it alot (like i made it from 5 connectors wide 2 six) so if i end up posting, it prolly wont be complete, but maybe missing 1 part (i think the front RB connector.
Jan 1, 2009. 9:04 PMTheDunkis
says:
Hmm cool I would I've been looking for a good gear operated rbg mechanism. I would see if you could give it a dark grey magazine for a knex shooting option though.
Jan 2, 2009. 6:28 AMstale56 (author)
says:
and how the poop would i give the rbg a mag? by like having a replacable grey gear?
Jan 2, 2009. 11:45 AMTheDunkis
says:
Oh it'll be easy just look at my Stg44 for an idea on how to add a dark gray connector magazine.
Jan 2, 2009. 2:22 PMstale56 (author)
says:
i tried and, its harder than it looks for this gun, cuz i want the rod that the cog is on to snap onto a connector, not go threw the connector, but ill look at urs 4 an idea
Jan 2, 2009. 2:27 PMstale56 (author)
says:
WAIT A SECOND! r u saying that i make it shoot accual pieces? not rubberbands? cuz i MIGHT! be able to do that, but prolly cant...
Jan 3, 2009. 9:23 AMTheDunkis
says:
Dude just look at my Stg44 instructable. You can still shoot rbs but you can also shoot pieces out of a magazine in front of the firing mech.
Jan 3, 2009. 9:26 AMstale56 (author)
says:
ok ya, i thought u meant make a mag for the rbs, like u add a pre-rb-ed gear to replace the old 1, ya ill try making it like urs...
Jan 3, 2009. 9:56 AMstale56 (author)
says:
i started working on the detachable mag, and so far progress is going along fine...
Jan 2, 2009. 6:30 AMstale56 (author)
says:
ill try to get working on that ASAP, i cant now cuz ppl are sleeping in the room next 2 were i build stuphz
Jan 2, 2009. 3:14 AMknexguy
says:
Ah, a 1 gear system! 2 gears would probably be more stable though. I would remake the handle, but post if you want. Oh, and if you have one use a red gear.
Jan 2, 2009. 6:26 AMstale56 (author)
says:
ya, u hook the rubberbands onto the smaller gear. i did remake the handle, well kinda, i made it on a slant and moved the trigger back one space
 |
Vancouver Mini Maker Faire 2012
Rebuilding NordicTrack ski machine drive rollers
Looking for New Zealand-based Instructables authors for conference on August 27 in Wellington
Call to makers - Brighton Mini Maker Faire
Milk Crates - not as green as you think
TEDxBaghdad - Iraq - violence, dust storms and open sourced manufacturing
UK Mini Maker Faire - The Derby Silk Mill - New Poster to Share!
