Groups »
Forums »
Answers »

Featured Groups

  • Bare Conductive
  • Drawing and Art
  • Sustainability
  • 123D
  • Fenix Intl, Ready Set Off The Grid
  • Kollabora
  • 3D Printing

COMMUNITY : FORUMS : COMMUNITY BLOG


UK Mini Maker Faire - The Derby Silk Mill - New Poster to Share!


Seems that the folks at Nottingham Hackspace (Nottinghack) and some new folks called Derby Makers are putting on a Mini Maker Faire bang in the middle of the UK, on Sunday the 3rd of June. We've just put up some cash to help things along and will be attending. Who's with us?

The Mini Maker will be held at the Silk Mill, which is reputed to be oldest factory in the UK, and up until recently was an industrial museum. It's still part of the museums trust and has some fantastic exhibits inside (Rolls Royce Merlin engine is my favourite!) which will be nestled alongside all manner of makers.

So are you coming? If not why not?

http://makerfairederby.wordpress.com/


viewer.png
438px-Derby_Silk_Mill_pre_1910.jpg
sort by: active | newest | oldest
50
gmjhowe says: May 4, 2012. 1:49 AM
Hello all,

Just to let you know that as the Community Team member closest to Derby, I will be representing Instructables at the Derby Mini Maker Faire.

I will have my big painted Instrutables robots, and more stickers than I know what to do with.

So do come on down and say hello.
165
Kiteman says: Jun 1, 2012. 3:19 PM
Right - we're off early tomorrow to try & beat the Bank Holiday traffic.

I'll try & post over the weekend if there's access to wifi, even if it's only a tweet or two (watch @KitemanX), but otherwise I'll post photos on Monday.

If you're going, come and see us on the Instructables stand, we'll have Robot stickers, and even (a few) actual fabric patches for special people...
49
lemonie says: Jun 1, 2012. 3:50 PM
Sunday is a bit of a sod for transport, but I'm still planning.

L
49
lemonie says: May 3, 2012. 1:40 PM
I'm interested, but can't commit yet.

L
2
phenoptix (author) in reply to lemonieMay 8, 2012. 1:24 AM
Any news on your commitment issues Lemonie?
49
lemonie in reply to phenoptixMay 8, 2012. 11:17 AM
I think I'm free; I've eliminated 3 events that aren't on that weekend now and I can't think of any more. Yea!

L
2
phenoptix (author) in reply to lemonieMay 10, 2012. 12:50 AM
Excellent work! I'll see you there!
49
lemonie in reply to phenoptixMay 10, 2012. 1:26 PM
Yes, that'll be good, I don't think we've met before(?)

L
2
phenoptix (author) in reply to lemonieMay 10, 2012. 1:30 PM
I've never made it to an instructables event or a maker faire before, despite being around for a while! I've been too busy putting LEDs into bags for most of the time!
49
lemonie in reply to phenoptixMay 13, 2012. 2:33 PM
As long as you're not putting LEDs up your nose or in your ears...

L
165
Kiteman says: May 10, 2012. 10:36 AM
Isn't that the wrong robot on the poster?
2
phenoptix (author) in reply to KitemanMay 10, 2012. 1:02 PM
I think the organisers had enough fun getting the licence from Make let alone the instructables robot!
165
Kiteman in reply to phenoptixMay 10, 2012. 1:07 PM
It's not so hard to get permission to use Robot...
133
caitlinsdad in reply to KitemanMay 10, 2012. 2:18 PM
They seem to now flaunt the "World's Biggest Show and Tell" now.
165
Kiteman in reply to caitlinsdadMay 10, 2012. 2:55 PM
What, Make use it?
133
caitlinsdad in reply to KitemanMay 10, 2012. 4:11 PM
http://cdn.makezine.com/make/makerfaire/bayarea/2012/MF12BA_Program_LoResFINAL.pdf Hmm, it seems it is The Greatest Show (and Tell) on Earth but I recall seeing it blogged elsewise..  Maybe pro quid pro for share what you make.  Undisclosed terms of the backroom deal?

this comment will self-destruct after reading.
165
Kiteman in reply to caitlinsdadMay 11, 2012. 9:13 AM
Hmm, those parentheses probably help them avoid any legal shenanigans.
133
caitlinsdad in reply to KitemanMay 11, 2012. 10:30 AM
You sure don't want to tangle with a bunch of clowns.
165
Kiteman says: May 3, 2012. 11:02 AM
Oh, good luck - what sort of people have you got arranged, or is this the first call?

2
phenoptix (author) in reply to KitemanMay 3, 2012. 12:19 PM
There's about 30 people showing I think, there's a really wide range. From book binding to quadcopters to light painting and steampunk. There's been a really good uptake so far.
50
gmjhowe in reply to phenoptixMay 4, 2012. 1:52 AM
I am going to be there representing instructables Kiteman.

Basically if any of the inner sanctum/Community Team want to join me, I have space for a few extra people.

Plus you remember how busy it was at the Maker Faire in Newcastle, and there was nigh 8 of us there.
165
Kiteman in reply to gmjhoweMay 6, 2012. 1:33 PM
I've got news to tell you when we get there...
165
Kiteman in reply to gmjhoweMay 4, 2012. 11:09 AM
I'm pretty sure I can make it, and I'll probably have company.
165
Kiteman in reply to KitemanMay 6, 2012. 12:21 PM
We've booked our motel room for Saturday & Sunday nights (it's the first weekend of our half-term break).

All we need now are tickets for the event...
165
Kiteman in reply to KitemanMay 6, 2012. 12:30 PM
Right, I've registered for a discount on the door.
46
Jayefuu in reply to KitemanMay 6, 2012. 12:34 PM
I don't get it... so you buy a ticket online but still have to pay £2.50 at the door? How much is the online ticket? It doesn't say how much the ticket at the door is without the eventbright thing.
165
Kiteman in reply to JayefuuMay 6, 2012. 12:45 PM
The online thing is a voucher - you get a PDF file to print out and show at the door.
46
Jayefuu in reply to KitemanMay 6, 2012. 12:46 PM
Ahhh right, that wasn't very clear.
46
Jayefuu says: May 6, 2012. 9:08 AM
This sounds fun, can I buy a ticket at the door? So long as I'm not in the US at the time, I'm likely to be there!
165
Kiteman in reply to JayefuuMay 6, 2012. 12:29 PM
Seems you can, but if you register here, you get a discount.
133
caitlinsdad says: May 4, 2012. 4:29 PM
Any live links on the day of the Faire? Skype or Facetime or streaming? At least have an upload of a video tour of the highlights of the event. Good luck.
2
phenoptix (author) in reply to caitlinsdadMay 5, 2012. 1:08 AM
Not sure if a live feed has been arranged, we should see if we could do it. I think various video tours will be uploaded!
165
Kiteman says: May 4, 2012. 12:40 PM
For navigation purposes, is this the right place?
2
phenoptix (author) in reply to KitemanMay 5, 2012. 12:51 AM
That's the right place, some of the pictures and reviews are for the pub across the road though! I'm a little unsure of the parking plans for the event. I'll see if I can find that out!
19
PKM says: May 4, 2012. 7:51 AM
While I've probably been absent for long enough not to count as "inner sanctum" any more, I'd love to come up and will happily demo some stuff if need be (and there's space).
50
gmjhowe in reply to PKMMay 4, 2012. 12:25 PM
Hey now, there is no leaving the inner sanctum. If you can make it up, it would be great to see you. We will have plenty of space. We can always rotate people who are on the table.

Obviously the more awesome projects we have the better.
2
phenoptix (author) in reply to PKMMay 4, 2012. 8:43 AM
Those "inner sanctum" tattoos don't fade do they?!
107
killerjackalope says: May 3, 2012. 11:04 AM
Oh come on! I'm supposed to be in nottingham on the 7th...
50
gmjhowe in reply to killerjackalopeMay 4, 2012. 1:51 AM
What you doing in nottingham on the 7th? We should so meet up if we can.

(I am a member of Nottingham Hackspace so can show you around etc)
107
killerjackalope in reply to gmjhoweMay 4, 2012. 5:02 AM
Visiting a friend, I'm over for a few days, think it's the friday to the tuesday, so should be able to meet you at some point over that, It'd be awesome to see the hackerspace...
2
phenoptix (author) in reply to killerjackalopeMay 3, 2012. 12:25 PM
So Derby the week before for a taster! You should try and visit the hackspace in Nottingham if you can, they've done great things!
107
killerjackalope in reply to phenoptixMay 4, 2012. 5:03 AM
Ah I'm over in Northern Ireland, so not just a car journey... I'll hopefully manage to see it...
165
Kiteman says: May 3, 2012. 11:47 AM
What time is it on?
2
phenoptix (author) in reply to KitemanMay 3, 2012. 12:27 PM
It's on from 11-4, with the Saturday being open for the makers who are exhibiting. They might let lowly sponsors in too if I'm lucky.
165
Kiteman in reply to phenoptixMay 3, 2012. 2:05 PM
That sounds [provisionally] do-able as a day trip!
2
phenoptix (author) says: May 3, 2012. 8:38 AM
So what are your thoughts folks? I thought I'd make the first comment as I couldn't find the post on the community blog list!
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!