Dear Kelseymh, I have no problems and I am preparing the release of a three wheel car, which by just applying the Hydrogen Generator, is producing over 100 mpg but still reliant on Hydrogen supplied into the gasoline mix. This prototype car will sell for $8500, be in blue or red. The engine is able to reach max speed of 85 mph but cruise at 65 mph and again with over 100 mpg rates. I am now setting up Dealerships, throughout the USA, so when the launch occurs, everyone can make the order lists, for $1500 deposits. I expect to have 1000 sold in the first month. With gas prices at over $4 a gallon and cars selling for $25,000 for 40 mpg and over $35,000 for Electrics with limited range, these three wheel cars will sell in 100s at dealerships. Then the money revenue generated, will supply the need final prototype for hydrogen carburetor unit to be finalized and adapted to the cars, for a "Full Water Car Prototype Release" in a year. These cars will sell world wide for $15,000, with fuel being water only, financing in the USA, possible.

I am not going to reveal it, I will tell you, we have the prototype car which will run only on water, enter the market with the car to specifically be sold to be warranted only if it is run on water. The maintenance for three years will be totally provide, just like BMW. Tires will have a road hazard policy and be totally insured as per that policy. The consumer will only have to drive the vehicle.

you have the same abilities as I do to search the Data Base at the US Patent office,

do it, as I did.

I have downloaded three expired patents which all refer to the same process, building blocks towards a break through, which the DOE has surpressed.

Orthohydrogen molecules electrons travel at given speed and that speed current determines the amount of energy released.

What if we could excellerate the molecule electrons? What would be the increase in energy release at the time of ignition?

Dear Kelseymh,
I have no problems and I am preparing the release of a three wheel car, which by just applying the Hydrogen Generator, is producing over 100 mpg but still reliant on Hydrogen supplied into the gasoline mix. This prototype car will sell for $8500, be in blue or red. The engine is able to reach max speed of 85 mph but cruise at 65 mph and again with over 100 mpg rates. I am now setting up Dealerships, throughout the USA, so when the launch occurs, everyone can make the order lists, for $1500 deposits. I expect to have 1000 sold in the first month. With gas prices at over $4 a gallon and cars selling for $25,000 for 40 mpg and over $35,000 for Electrics with limited range, these three wheel cars will sell in 100s at dealerships.
Then the money revenue generated, will supply the need final prototype for hydrogen carburetor unit to be finalized and adapted to the cars, for a "Full Water Car Prototype Release" in a year. These cars will sell world wide for $15,000, with fuel being water only, financing in the USA, possible

what does these words on the home page mean

3 Simple Ways to
Share What You Make

With Instructables you can share what you make with the world — and tap into an ever-growing community of creative experts.

I attempted to share and the members assumed I was asking for assistance.

I am not asking for assistance.

Are you seriously writing me and telling me you feel my invention is an attempt for a Car which runs in Water?

OMG

Applied to motor boats and sailboats, in water. intake of water, converted to Hydrogen to fuel the engine and exhausted back into the water, no storage.

A Car which the fuel is Hydrogen produced from water electrolysis process and piped into the carburetor intake.

Please, try to read my writing.

MGC

You are exactly right however my methods to find out information is not conventional. You are trying to pry into my information and I was trying to discover what those on this site think, what they feel and how is this thinking going to help or hurt, the introduction of a small car, manufactured in China, imported here, which is three wheels, max speed is 65 mph and 75 mpg modified, first to a HHO on Demand system to boost its mpg and then later changed completely to a water only for fuel vehicle, once the Orthohydrogen unit matched to the engine is perfected, tested and launch, nationwide, almost over night.
I am the person going to many social sites, testing the water.

I can only tell you that Bill Gates and Steve Jobs, did not always get everything right. They did not have degrees and they were "Out of the Box" and so am I.

I will never conform and will never live up to your expectations however to give consideration to your views, is important to me.

However, you will not give your insights, as with someone of your degree level, you are intent to dig at my patent number, to find out where I have my prototype, to know everything there is to know about me, the machine and when you can view it.

I am not going about the release the same way as anyone else and frankly, I am totally financially secure, so I am not motivated by greed or by how much this car will make in capital. My only motivation is that it will compete with the 100% Electric Cars being released, the Leaf and the Mi! If it is lawful to have 100% Electric Cars which does not pay the 0.50 cent highway dollar in taxes off the gasoline then so is a Water Car, 100% run off Hydrogen, plus American produced.

Please, after this email, please stop asking me. Tell me what you know about the perfect means of creating a Electrolysis system to produce high grade OrthoHydrogen, cheaply and economically.

That is it, if you can not or will not do this, then we have nothing to speak about.

MGC

Low freq Para'
High freq Ortho
Electrons move at a given speed
However particles have been sped up through patents
What if we push the element's electron speed, faster, will the amount of energy force be greater?

As with all useless PHDs, never more than exploiting your "New Found Knowledge" to place your "Supreme" authority on us "Mere Mortals".

I knew from your profile and your postings, once I researched you as an individual, you would either be a good guy or an "Axxxxle", people like you defind yourself with your actions, actions speak louder than words.

Are we finally finished, oh Great Master?

What EVER!

It is not a whole new engine, it is a 2 cylinder, 32 hp engine which is used for a 3 wheel car. You can find the car, at www.snyder.com should you want to see the car. The car is sold for $7995, currently. It is a commuter car and gets about 75 mpg, with no modifications.

My invention was to be focused on sail boats and motor boats, since the boat is surrounded by water, no need to store water, an endless supply surrounds the boat while operating in the water.

Everyone, always asks, can it be placed on a car. A carburetor is a device which mixes air to a chemical which holds energy, gasoline, diesel or hydrogen. An adaption of this product could be placed on any engine, if the proper R&D was done first. I did not focus on cars, their is www.HHO2U.com which has a nice dry cell application already built for $199, which is just fine for now. Why, put myself in the "Spot Light" and be the wipping boy for every "NaySayer" in the USA, just because I have a patent describing a device which takes water and splits off the hydrogen to mix it with air to input into a engine so it can run?

I want to stop all this "NaySaying" action.

Please, do not bring this subject up and I will not speak of it again.

When I release my product, I am sure, some magazine or reporter will find a way to bring it to the Consumer News, but I will try to keep it secret, as long as possible.

MGC

I must say that this web site is not about DIY inventors discussing their finished inventions, it is about giving away, all the secrets to creating the invention to those who are DIY inventors.

I am so sorry, for ever talking about a small patent about which is my invention to produce Hydrogen to mix air with it and input it into simple 4 cylinder engines. My application, was in sail boats and motor boats, which are surrounded by water. However, everyone said, can it be adapted for cars, well I guess it could but I did not want the focus from the Fuel Companies or the American who want to tear down all possible solutions to fossil fuel.

I am sorry to have ever brought this subject here.

Please do not respond to me and I will never bring this subject up again.


Thank you,
Marksman954

That is exactly right but what if?

There was a way to increase the speed of the electrons of the orthohydrogen molecule, so that the energy release is greater?

We would need a way to push the molecules, to push their speed faster and increase the results of the energy release!

It has been done, there is a patent, to do just that.