3 Simple Ways to Share What You Make
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Create on the go:
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Usually, I tackle a project by recognizing a need, and then go about problem solving. In this case, I had a want... and it took me a few minutes to realize it was also a perfect solution! I fell in love with a small arts and crafts style desk at a local auction. But I couldn't really justify bu…
Without a garage or basement shop area, I have to intersperse project supplies among...pretty much everything else. Fortunately, I have landlords that don't mind occasionally hearing a drill or sander late at night.
I waited two loooong years to begin this project. When I was ready to start the first time, I found that it was directly over my drain field. Of course, I could have redesigned my septic sytem, right? Well, the City informed me that sewers were coming in two years. To hook up to the sewer was…
Here are some photos of my workspace for the Share Your Space Contest. It's a bit modest since I live in a one bedroom condo. Instead of a shed, studio or workshop to work in I use my living room coffee table, dining room table and kitchen counter. The coffee table is great to work on since it …
Welcome to my world - what used to be an stonebuilt outside toilet and coal store (common to my part of the world) has now been 'upgraded' to my workspace. This is an old pic, I've since managed to shoehorn in a small bandsaw... seriously!
The room where It all started. My first instructable that has multiplied into more than 180 different instructables. Also the room I have been given the most grief. People might have realised there is a lot of time effort and materials that go into the projects. It would have been a bit nicer if …
I have made several of these benches over the years, and it was always the first thing I made when moving into a new house. I like to be organized, and figured it didn't hurt to make it look attractive as well. Basic woodworking skills and the tools that that requires are necessary for a project …
After 10 years collecting stuff and making stuff I decided it was time to clean up my workspace. So it's never been this clean before and, although it's not completely finished yet, I'm very pleased with the results and even can walk trough it without stumbling over stuff. Aaah, what a relief! I…
This is a video I put together of the work I did to create my own man space, affectionately know as "Mantown" by friends and family. I put the video together in 2008, but this is the first time it has been published for public consumption. Be sure to stick around for the tour of the completed spa…
Here are the parts of my computer setup this is my second instuctable but I have more to come don't forget to comment P.S I'm only 13 So no bad comments
never planed on instructableing this so the pics are a bit limited.. i would say this sort of project is something that can be accomplished in a few days basic understanding of pool plumbing and carpentry is necessary.. concept came after a long rain filled our warehouse loading with black di…
Well, this is my little workspace complete with my moms antique desk that she gave me. I have a great assortment of glue and in the back cubby, is where my WIP's are (Works In Progress). I work in here almost every day and enjoy listening to music most of the time.
For several years in a row we stupidly invested in expensive pre-feb screen rooms for buggy summer evenings. None of them survived through the next season. We decided to build our own. The original idea was a very simple screened in structure, but we managed to save a ton of money by purchasing s…
I am spoiled, I admit it, I have a winter and summer shop to play with. I still need to get better organized in both places, and perhaps develop better habits, such as putting things away after I use them. But that's an argument my wife and I have frequently. The Summer shop does have some heat …
I am a developer for an education company. We create projects using common manip systems (such as LEGO, fischertechnik, K'NEX, Baufix, Vex, Erector, Poly-M, Lincoln Logs, Minds-I, and Tamiya products to name a few). I share my office with another developer. (We have other developers, but they ten…
This is my workspace, a corner in my basement where I can often be found tinkering and blaring Jack Johnson on my hacked-up radio. It consists of an old and extremely large teachers desk, and a table-turned workbench. In and on my desk I store the majority of my various parts and tools, …
The following sequence of photos shows my assigned portion of a 20' X 18' room. Starting behind where I sit, and going clockwise, to the left of where I sit, then forward of where I sit, finally ending at the seat of (dis)honor and then my main seeing device. It is cramped at best, cluttered a…
here is my second worshop more for the bigger things needed to be made soon there will be an addition of a shopbot prs alpha 96 if you like it let me know or if u want mor info
Welcome to our photographic tour through the Craft Technology Lab at CU Boulder. The Craft Tech Lab is part of the computer science department, and is run by faculty Mike and Ann Eisenberg, with doctoral students Yingdan Huang, Jane Meyers, and Ben Leduc-Mills.
This is my shop, well, it's more like a combination of many shops. In one corner I have my small engine and tractor repair shop. on the main wall I have my shop bench for any projects (primarily instructables.) Then on that same wall but sunken in more is the electronics desk, Cluttered from stuf…
This is my space. I know I should have a proper workshop (and clean up now and then) but there's no room for that. Also, I'm lazy. Edit: Oh yay! I won a Leatherman!
I have two main workspaces. The first is my shop, which is primarily equipped for metal working, but I also do quite a bit of woodworking there as well. The second workspace is the office in my home, where most of the design takes place. I'll begin with the shop's workspace. The photo below…
Here's my basement workshop. I'ts great to have a place to work year around, rain or shine. Needless to say I spend a lot of time here.
I have just recently moved to this rented property and it has an garage! The previous one did not and my tools were all over the house. as you can see I have to share the garage with a car. Actually two but the second one was not the at the time of making this indestructible. Having to share the…
Here are the pictures of my room and my workshop!! Hope you enjoy. Feel free to ask about the things in my room. Some of the wooden furniture is of my own design and I hope you like them! I couldn't get pictures of my garage workshop today, and I will post 'em soon. Stay tuned for more pics. B…
My workspace! OPEN DAY The Idea-factory (est.1983) OPEN DAY + visit my factory + see where the magic happens + follow the process of a project from idea to product I'm not a lousy drawer - that's what it actually lookes like :)
I got the phone call today telling me that my long awaited shoulder surgery is going to take place in just over three weeks. It will be the third crack at fixing an old injury & judging by past experience I won't be doing any sawing or hammering for a few months afterwards so all those little jo…
I have taken a few pictures of my electronics corner in my garage for your viewing pleasure. I hope you enjoy it! Pictures are presented in a basically clockwise pattern of my work area. Then I added a few projects in progress files as well.
This is my workspace which includes material storage, tools, instructional materials and an inspiration wall. The close up pics detail the various items used in the workshop. Enjoy!!
SImple picture of where I work on whatever project needs completing, from building bookshelves, a dollhouse, re-facing kitchen cabinets, to routine automotive maintenance. It may not look like much, and I spent next to nothing getting it set up (gotta love Freecycle), but it works for me.
This workspace has a computer, soldering pad, drill press, tons of storage and more. I got this workbench about 2 years ago and it is perfect for the stuff i do. It is well lit and has plenty of room for me to spread out the project i'm working on. I use the computer for my CAD drawings and to lo…
I'm in school right now to be an industrial designer and so I use most of my space for ideation, drawing, concept modeling, storing, and sleep once every blue moon. The main thing I would change is the organization of the space =( My favorite utility (besides my laptop) is my table. Someone had …
This is where I spend 90% of my time. It's not very warm because it's the basement but the view out the window is great, I have tons of books to read, a comfy bed to nap in and really anything I need.
Here is my miniature media design studio. If you are jealous of the blue light then Click here! to learn to make your own.
see also : SuperMatt's SuperBlackBox : http://www.instructables.com/id/SuperMatts-SuperBlackBox-4-computers-gig-E-net/ ------------------------------------------------------------------------------- In the past I have been possessed of huge shops - the biggest probably 3000 square fee…
This is the space I used to create my "work". I am a photographer, videographer, tinkerer, costumer and general "artist" Shot and edited with iPhone 4. Apps used were: iMajiCam Pro and Splice video editor. Music by Heyoka.
This is where I do my woodworking- sad isn't it. It is actually just a shipping container. Oh well, it gets the job done on a rainy day and it keeps the dust down. At least it's got air conditioning.
This is where I do all my electronics stuff, whether it be (de)(re)soldering, looking at waveforms, studying, programming, or taking-apart. Pretty much everything you see was, until not too long ago, packed onto a single desk in my room. But because of the lack of space, as well as the thought…
So this is my workspace, and the computer i get all of my ideas from, there isn't much, but they didn't say that it had to look pretty either...
This is my workspace in my garage and in my room. I usually don't work in my room but it is winter and really cold. I am sorry it is disorganized and really cluttered. It is that way because like I said it is winter at the moment so i just put stuff out there. We, me and other friends, do a lot …
140
entries
0
days left
48
prizes
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »