Print PDF
Favorite
Email
Step 11Day 2
I hope you slept well :)
Day two starts by taking a putty knife and prying under the flange surface up to the plug -- to release. We won't be removing the tool from the plug - more on that later.
Next, use bits of wood to push the plug out of the stand to release and support it a few inches above the stand.
Day two starts by taking a putty knife and prying under the flange surface up to the plug -- to release. We won't be removing the tool from the plug - more on that later.
Next, use bits of wood to push the plug out of the stand to release and support it a few inches above the stand.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
