Print PDF
Favorite
Email
Step 13Remove Plug - Clean Stand
Now it's time to remove our plug. At this time do not lift by the flange - we want to keep the tool on the plug. Once the plug has been flipped over - you can grab the flange - but only when the tool acts as a bucket for the plug.
Set the plug/tool aside and clean the stand with a putty knife. We're just removing any excess PVA and glass bits so it won't interfere with the fresh coats of PVA later.
Set the plug/tool aside and clean the stand with a putty knife. We're just removing any excess PVA and glass bits so it won't interfere with the fresh coats of PVA later.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
