Print PDF
Favorite
Email
Step 4Mixing - With Fillers
Sometimes, it is beneficial to add a filler/thickening agent. Types of thickening agents and their uses are beyond the scope of this instructable - but in general, mixing them into your resin is the same process.
1. Measure out how much resin you need.
2. Add a small amount of filler
3. Mix in well
4. Repeat steps 2-4 until the desired amount has been added OR until you reach your desired viscosity
5. Add a measured amount of catalyst (as per the resin requirements).
Remember, adding fillers can increase the amount of heat generated due to the internal friction of the resin mixture - be aware of this as it may play a role in your pot life (how long it takes before the resin starts heating up/curing).
1. Measure out how much resin you need.
2. Add a small amount of filler
3. Mix in well
4. Repeat steps 2-4 until the desired amount has been added OR until you reach your desired viscosity
5. Add a measured amount of catalyst (as per the resin requirements).
Remember, adding fillers can increase the amount of heat generated due to the internal friction of the resin mixture - be aware of this as it may play a role in your pot life (how long it takes before the resin starts heating up/curing).
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
