With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
share step-by-step photos with text instructions
share one or more photos in one step quickly and easily
share your how-to video
I like The Arduino a lot so I decided to make a Instructable for a L.E.D. MOOD-LIGHT that goes like this: Green=on Yellow=on red=on Green=off Yellow=o...
You Will Need: 1x Yellow LED 1x Red Led 1x Green Led ?x Jumper Wires 3x Resistors 1x Arduino UNO 1x Solder-less Breadboard 20x Minutes
Put The LEDS onto your breadboard as show in the picture.
Connect the negative leads of the LEDs to the negatve rail.
Add the resistors to the positive leads on the LEDs.
Connect the GND pin on the Arduino to the negative rail on the Arduino.
Connect pin 13 on the Arduino to one end of the resistor connected to the green Led.
Connect pin 12 on the Arduino to the resistor connected to the yellow Led.
Connect pin 8 on the Arduino to the resistor connected to the red Led.
This is the Code: (Made By Me) Just copy and paste into ARDUINO! /* This Code Is Made By Building_Boy For Instructables. It Will Cylcle Through ...
To change the speed you need to open the code and change all of the (1000) into smaller numbers (For best effect use 250 on all the delays.
Just Load the Code And You are done! Now you have a cool mood-light!
Tag files as:
Posted:Mar 3, 2012
Arduino, LED, Dice!
DIY Infrared Proximity Sensor (Arduino Compatible)
How to Make an LED Ambient Mood Light: A Beginner Tutorial
RGB LED Moodlight in 10 minutes!
Arduino-powered A-10 stick grip remote w/Emergency Party Button!
Arduino ADK LED Lighting
Intro to Arduino
Light Sensing LEDs
Mood Lamp with Arduino
Download our new apps for iOS and android!
PDF DownloadsAs a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.