Print PDF
Favorite
Email
Step 9Firmware Roadmap
v0.2
An Exit Confirmation/Dialog.
Setup - Expand setup options to include:
On-time duration/menu time-out (and an always-on mode).
Brightness (duty cycle).
Scroll Speed.
Menu Font Upgrade
-'E' and 'B' look really bad, use 'e', 'b'.
Move to 1Mhz or 32.768khz oscillator (4MHz in v0.1).
v0.3
Stopwatch (time increment forward)
-Starts counting seconds, then increments minutes and hours after the 15:59 display limit.
Timer/Alarm (time increment backwards)
-A deincrementing timer, all LEDs flash when timer reaches 0.
EEPROM (logging values to flash memory)
-Save voltages, counts, options, stopwatch times, etc to flash EEPROM memory.
-Log number of days run since battery change. Also:number of hours with display on.
v0.4
External hardware features (using ICSP header):
Event logging on interrupt.
Bicycle Odometer/Speedometer.
Adjustable Unit Display (binary or decimal-font).
An Exit Confirmation/Dialog.
Setup - Expand setup options to include:
On-time duration/menu time-out (and an always-on mode).
Brightness (duty cycle).
Scroll Speed.
Menu Font Upgrade
-'E' and 'B' look really bad, use 'e', 'b'.
Move to 1Mhz or 32.768khz oscillator (4MHz in v0.1).
v0.3
Stopwatch (time increment forward)
-Starts counting seconds, then increments minutes and hours after the 15:59 display limit.
Timer/Alarm (time increment backwards)
-A deincrementing timer, all LEDs flash when timer reaches 0.
EEPROM (logging values to flash memory)
-Save voltages, counts, options, stopwatch times, etc to flash EEPROM memory.
-Log number of days run since battery change. Also:number of hours with display on.
v0.4
External hardware features (using ICSP header):
Event logging on interrupt.
Bicycle Odometer/Speedometer.
Adjustable Unit Display (binary or decimal-font).
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
