Print PDF
Favorite
Email
Step 4Mark the beam and wind the antenna wire
You must mark the beam every 3 centimeters. After doing that the 1.5mm2 wire can be stripped. The wire must be stripped since the isolation is not suitable for high frequency uses. It will be very lossy which means your antenna will have much less gain.
When the wire is stripped, it can be wound around the beam, exactly over the markings, in a nice equal spiral.
When the wire is stripped, it can be wound around the beam, exactly over the markings, in a nice equal spiral.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Dec 12, 2011. 2:33 AMpteranosaur
says:
He said 'insulation'...
Reply
 |
Add Comment
|
