With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
The year is 2012, the Great Cube War of Call Center Six has all but decimated productivity. You need an edge, I way to give you the upper hand. You ne...
Tools The tools I used were: Drill 3/8 bit Small drivers Super Glue Multi-Tool Soldering Iron Desoldering Iron Electrical...
Remove the Flex neck from your parts lamp. Save the nuts!
If not soldering, Skip ahead. Gain access to you webcams main connection point, be careful webcams are put together with some sort of magic that onl...
Feed your usb cable though the Flex tube.
Cut a hole where the original USB cable entered the webcam.
Feed the wire and flex though the hole you just made. Use the nuts you saved to attach the cam to the flex tube. Add a 'nub' to to keep your solders s...
On the other side of the flex tube attach some sort of handle. It helps to balance the Webcam, and give you a good place to hold on to. I used PVC So ...
Enjoy your 'new' Webcam! Let me know what you all think, I loooove comments :)
Remove these ads by
Signing Up
Not NiceInappropriateSpam7,679 views
19 favorites
Posted:
Jun 11, 2012
License:
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »