Print PDF
Favorite
Email
Step 13Two ringie-dingie
Arrange three of the X's from the previous step with the bent-leg negative leads all at the top left, as in the drawing.
Since we want the resulting group of three X's to form a quarter circle, clip off about 1/3 of the length of each positive lead.
Join all the the three X's together at the negative leads and at the positive leads, giving a semi-circle of X's.
Construction tip: Use the needle-nosed pliers to make complementary bends at the tips of the leads so that they hook together; then use the third-hand jig to put tension on the junction as you solder it.
The result will be about a quarter-circle of LEDs.
Since we want the resulting group of three X's to form a quarter circle, clip off about 1/3 of the length of each positive lead.
Join all the the three X's together at the negative leads and at the positive leads, giving a semi-circle of X's.
Construction tip: Use the needle-nosed pliers to make complementary bends at the tips of the leads so that they hook together; then use the third-hand jig to put tension on the junction as you solder it.
The result will be about a quarter-circle of LEDs.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
