Using a gear generator i found online, ( http://woodgears.ca/gear/index.html ) I cut his 32 inch diameter gear, with 128 teeth using a jigsaw. The smaller gear was cut on a band saw. Before making this large scale piece I made a scaled down version for prototyping, using the same gear ratio, but on a 16 inc large gear.


112 Tooth Gear, Noise Making Machine from Christopher Zeppieri on Vimeo.

jensenr304 years ago
I use the same gear template generator
jensenr304 years ago
scoochmaroo4 years ago
Wow, that looks intense.