Picture of 13 Unusual Uses for a Hair Dryer
OHHHH the unusual things you can do with your house hold gadgets!!!  I've thoroughly research all the strange weird uses for your blow dryer. Yes that's correct: BLOW DRYER.  Fitting your glasses to your head and adding a glaze to your cake frosting are just some of the unusual uses I discovered.

You can tell from the look on my face that this is no joke ;)

Remove these adsRemove these ads by Signing Up

Step 1: Remove Stickers and Price Tags

Picture of Remove Stickers and Price Tags
Have you ever spent hours peeling of a sticker from a window or box?  You scratch it but can only get small bits of paper off...

The hot hair from a hair dryer will loosen a price tag or sticker making removal super easy.  You can also use this trick to remove contact paper from shelves.

Step 2: Custom Fit Your Glasses

Picture of Custom Fit Your Glasses
Custom fit your plastic frame glasses.  Simply heat up the ends and mold them to fit our head.

This works great on store bought glasses.  I wouldn't recommend this for your $300 designer glasses frames.  I bought these prescription glasses in Vietnam for only $12!  They're a great back up pair.

Step 3: Wax on WAX OFF

Picture of wax on WAX OFF
Getting candle wax on wood furniture can be a nightmare to get off (again with the scratching!!!).  The best way to remove it is to heat it back up.  Blow medium heat on the wax until it starts to melt then wipe away with a cloth.

Step 4: Add Gloss to Cake Frosting

Picture of Add Gloss to Cake Frosting
Give your baked good a professional looking gloss.  Turn your dryer on low heat and slowly blow it over the entire cake.

Step 5: Dry Clothing

Picture of Dry Clothing
Quickly dry spots of water you spilt on your clothes.  First REMOVE THE ARTICLE OF CLOTHING -- you don't want any burns on your skin! Hang it over a shower rod and dry.

If this happens at a party i fully encourage snooping through your friends bathroom cabinets for a dryer.

Step 6: Dry Steam Off of Mirror

Picture of Dry Steam Off of Mirror
Its frustrating to lose mirror access after a steamy shower!  Dry that steam off with a quick blast of hot air from your hair dryer.  Now you can just leave the blow dryer on and continue drying your hair :)
1-40 of 142Next »
mgalyean1 month ago

Related to the forced air forge comment above, I've used one to save several hours burning brush and leaves. I duct taped it to a 6' water pipe and stuck the other end into the center of the burn pile. Keep a garden hose and the extension cord / dryer cord join handy for safety.

viethoa90241 month ago

I've used it to dry for dogs fuzzy ^^

wkeels1 month ago

just make sure the heat is turned off on your blow dryer.

I live in Massachusetts, and sometimes our winters are very cold. So cold that the doors to my RAV 4 froze and I couldn't get in any of them to go to work. I took my trusty hairdryer out with my longest extension cord, and used it on the drivers side door, and in minutes, it was a done deal. One year we also had our water pipe freeze, so I took old trusty to the basement and thawed out the pipe where it came into the house from the street. It did take some time as I had to move the dryer along the pipe very slowly for about 6 to 8 feet. But it worked, and saved my pipe from bursting. Love, love my hairdryer.

SW4MP R4T6 months ago
we use a hair dryer to power our forge ( made from an old wok, tin can and metal pipe)

haidryers can be used to help light barbecues and are very good at defrosting freezers

Great uses for a blow drier, but be very careful using it on some surfaces, such as the lining of a freezer or refrigerator. If the heat setting is too high, and held in an area for too long, it could warp the material and/or heat the air under the lining wall, both causing massive bubbles to form.

shaddoty1 year ago
You can also fix a broken ps3 with a blow dryer.

Depends on the problem ,right? If i stamp a ps3(accidently) ,a blow dry ain`t gonna help....

amandagrrl10 months ago
In frigid weather, when your housemate turns the heat down at night, a hairdryer can warm up chilly sheets before you get in!
ski2moro1 year ago

Use your hair dryer in a motel to heat leftover pizza for breakfast.

tobynut1 year ago

You can use one to help get a barbecue or fire started. Instead of the classic frantic fanning it with a frisbee use a hair dryer, and it works super quick as it's hot air too!

jmelvin11 year ago
I use one to solder with! If you are trying to solder something and the solder won't melt. Preheat what ever you are trying to solder with a hair dryer.
valkgurl2 years ago
I used to work for an eye MD and the way to not "Knacker up" (love that!!!!) the lenses is to wrap them in a cool DAMP cloth when you heat treat the stems. This is done in a special vat of HOT plastic or glass beads at your MD's office BTW.

A few uses for those like me who live in the Cold North:

DEFROST your CAr windows on those wicked cold days

UNFREEZE your car DOORS on those wicked cold days--this is very helpful after those rainy days when it gets so cold that your seals freeze and your doors are stuck closed.

Use it to tighten up the WINDOW FILM you put on over your windows to keep drafts and insulate--the heat makes the plastic shrink and makes the seal work,

Blow down pesky cob webs from your ceilings

Blow dry your pets---this seems obvious but it is not always to some people. Use LOW heat and blower for this--esp if the paws are involved--can be useful to get ice balls out from between tender paw pads.

To thaw your fridge without ruining your dryer--place a large bowl or flat pan of BOILING WATER--pour into bowl that you place in freezer BEFORE you add H2o---and close the door for a few minutes. This might take a few re-fills but it works without having to use a potentially dangerous ice pick or knife on the sides and or top.
You can use the dryer to dry up the last bits of water in there to avoid NEW glacial formations!

Kris T.2 years ago
My hair dryer's been collecting dust ever since I cut my hair boy-short. Now I have a reason to use it again.
doo da do2 years ago
If you have room for a candle under the mirror, light it and it will keep most of the mirror fog free. Save energy (be sure to put it out before you leave).
damon16002 years ago
This works well with wax in carpet as well. Use the hair dryer to melt the wax and absorb it with paper towels or newspaper. It may make a few times but it really works!
cody.lomas2 years ago
they also make a great forge motor for black smithing
koolfool2 years ago
Just saw this tip on, "The Doctors". Use a hair drier to remove band-aids and/or adhesive medical tape. Haven't tried it myself, but it seems like a good idea, especially for kids.
i used mine to defrost my freezer but using it for that length of time created to much heat and it fussed the switch inside so it wouldn't turn off also the damage to it made it dangerous as it gave me a couple of shocks after that, now I have a new hair dryer i don't use it for anything but hair, :) but I have to say it did come in handy back at uni after a year of drinking and partying and little work to create my final pieces I did them all in acrylic and dried them off in no time at all, when my tutor sat there and told me she could see I had put a lot of time in inside I was laughing, I soon realized I was the fool as I was paying all that money out for the year but could do the work expected of me in a day, uni took me for a mug and without my hair dryer I would not have realized. :) in a round about sort of way anyway. :D
jstarkmuth3 years ago
For the dust removal purpose, it would be a good idea to use an old dryer that only blows, but does not produce heat any more, in order to save energy and money - and to protect heat-sensitive targets. In that case, you could also add a nozzle (made of paper or similar) with a smaller opening to get a stronger air stream.
Most hair dryers have no-heat setting, or at least a low-heat setting that uses little power.

It's a dubious use of the hair dryer, anyway. All it does is redistribute the dust in the house. If I have something with intricate contours that needs to be dusted, such as my desktop computer, I take it outside and blow it clean with a compressed air at about 40 psi.
Using compressed air on electronics boards is not advisable since you could end up blowing the dust under the chips or deeper into the appliance. The age old custom of dusting was just that... redistributing the dust off the furniture so that more of it would settle to the floor where it could be swept up. Nowadays we would hope one has central air with a filter. Any dust blown off ones nick knacks would get sucked into the filter. If you can't have a feather duster, then using a hair dryer for multiple purposes is the next best thing. :-)
It's just like a leaf blower but for dust!
Actually, the old feather dusters did not just redistribute the dust to the floor, the static electricity in the feathers attracted the dust and it would cling to the feathers. You need to periodically take it outside and "redistribute" the dust that it has collected outside the house by shaking it or beating it on the side of the house or whatever.
There are special dusters with plastic fibers which really attract a lot of dust - you can rub them on a wool carpet to charge them electrostatically before use. Though I'm not sure whether that electricity would pose a threat to electronics if you touch the components directly. But I use that duster to clean all my devices, lamps etc. from outside. Even if a part of the dust is just redistributed, it will mostly settle on the floor or other areas where it can be more easily removed later.
You're correct to be concerned about static charges in the duster damaging sensitive electronics. In classes and technical seminars we were taught that the charge build-up on a Styrofoam coffee cup just brought NEAR MOSFETs or CMOS circuits without actually touching could create enough of an electric field in the devices to damage them. Sometimes they'll still work, but then experience latent failures. Once installed on a circuit board and surrounded by resistors and other passive components they're less vulnerable, but I prefer not to take chances..
"Using compressed air on electronics boards is not advisable since you could end up blowing the dust under the chips or deeper into the appliance."

40 psi with a rubber-tipped blowgun is sufficient to remove all dust, even UNDER the chips. It is less likely to cause damage than most other methods. Sometimes I help the process along with a 1-1/2" natural bristle paintbrush, particularly if the dust has caked a bit due to exposure to moisture, since natural bristles don't generate an appreciable static charge. As an electronics industry professional, I've been doing this successfully for many years with no damage to any devices.
Ace1933 years ago
You have to be careful about drying shoes too quickly though. It is easy to deteriorate adhesives in the soles of shoes without noticing until they separate months later.
no offense to the people who put the work into these instructables but doesn't it seem fairly obvious to use a hair dryer to dry clothes or windows.
polish boots/shoes? works great after you rub in some polish hit it with the hair dryer for a very high gloss shine, buff with a wet cotton ball after it cools a little!
So true!!! And much safer than attempting to melt polish with flame which can end up with boots going up in flames and just a pile of rubber left... =D
joey993 years ago
how about useing it to pinch a lacrosse stick?
STCVKR3 years ago
What about to remove dents from pingpong/table tennis balls?
I quickly dry my nails by running water over them. Start with slightly warmer water and increase to cold, it only takes seconds and takes away the stinky nail polish smell.
TN7773 years ago
Another way to custom fit glasses- Boil a pot of water and and dip the trouble leg in it untill soft. Mold to shape you need!
The loudest hot compress in the world! Never thought of that though, good idea!
i tried and it actually works
baskinator43 years ago
Just make sure you use cold air for computers! The high heat could easily melt solder connections if left on too long, rendering your expensive equipment useless and broken.
Hmm, this could actually be useful. Anyone remember the "oven" re-fluxing trick?
Are you saying a normal hair dryer can melt solder with the short duration of "dusting?" That seems difficult to do under normal "dusting" conditions, even on high heat. I wish my hair dryers were that powerful.   :)

On another note, I had to buy a special heat gun like a super-powered hair dryer to help me melt solder to recycle electronic parts off of old circuit boards. Even then it took a long time and the components did not just fall off without some effort.
1-40 of 142Next »