Print PDF
Favorite
Email
Step 3Cutting the traces
- Once we crack open the case and lift out the PCB we are going to have to cut some traces.
Cut all the traces where I have circled EXACTLY in red carefully, you dont have to remove it all just about 1mm of gap until the copper trace does not show (again, you do not have to cut all the way through):
What we are cutting is the mic, left, and right traces so that we can successfully re-wire our jack to be an exclusive mic jack!
Cut all the traces where I have circled EXACTLY in red carefully, you dont have to remove it all just about 1mm of gap until the copper trace does not show (again, you do not have to cut all the way through):
What we are cutting is the mic, left, and right traces so that we can successfully re-wire our jack to be an exclusive mic jack!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
