Introduction: 15 Sided Ninja Star!!! Waachow!

Learn how to make this cool 15 sided ninja star from my Instuctables


(this instructable is dedicated to Matt LeCocki)

Step 1: What You Need!

15 pieces of square paper
pair of hands
eyes to watch and look at instructables
brain to think
heart to live
and soul to concentrate!
and your ninja way...
(as in deadly ninja, good ninja, gay ninja, naruto ninja, and or super ninja)
(or just plain old normal ninja...)
Waachow!!!!

Step 2: All Steps...

this is a one whole step thingy but i think you should see the more detail things too...

Step 3: First... and Second... and Third...!

as you see fold the paper in half vertically or horizontally... then do the other side to so after you fold there will be a cross looking crease on the paper...

Step 4: Fourth! Fifth! Sixth! Seventh! and Eighth!!!

fold the corners of the square into the middle until the paper looks like a dimond!

Step 5: 9, 11, 10, 12 !!!

take the straight line from the bottom left hand side and fold it in to the middle line/crease! and then repeat for the other side! after this it should look like a kite!

Step 6: To Finish It Off! (just One Piece...)

13-17!!! okay first turn it around so you don't see and line indents but you only see a flat kite shaped surface. now at the shorter end of the paper or the top, fold down so basically this step is on the backside bring back top flap so it looks like a mini triangle on a tall triangle.
after that is done then you fold the two triangle looking thing in half so that you can see the small triangle on the fold/bend.

Step 7: Okay... Almost There...

now make 14 more of these... you can make different colors or all colors just make sure all the pieces are the same size...

Step 8: Oh Yea...

now after 15 pieces are completed... to connect these!!!
on the right angle of the foldeed triangle on the back it should look like two flaps or holes.and in the front of an other triangle are two points. now stab the two points into the two holes.

Step 9: WAACHOW!

bam! WAAAAACHOW!!! your done after you connect all 15 pieces and theres a circle in the middle of it. yay. later i will put a video...

Comments

author
TubaJ446 (author)2011-11-07

if u plan to throw it use glue or tape at least

author
TubaJ446 (author)2011-10-24

I remember building this a LONG time ago, thanks that was a good refresher

author
boggstown (author)2010-09-13

great ninjastar. i made one and it wasn't that hard and took less than a half hour. great ideia

author
roboryshko (author)boggstown2011-05-16

Its actually not a ninja star, it is a different type of origami known as the Spritzer

author
itsmypie (author)2011-01-25

..........
1: epic
2: WAACHOW!?

author
Player 1 (author)2009-04-10

um not by itself it wont unless u have alien paper of some sort... u can throw it tho... but it might not stay together...

author

U have alien paper?!?!?! I want some!!! I made an ible about a ninja star too, you should check it out!

author
ninja_maker (author)2010-08-20

this is so awesome! the only thing is that u should glue them together then you can throw it!! B)

author
Neovenetar (author)2010-08-14

hmm, what would happen if i made one out of metal i wonder, i'd better not, or else chuck norris will fall from the sky and challenge me to a fight with my new weapon, the he would pwn me..... probably.

author
almcgo (author)2010-03-22

lol i started 2 make about 4 points then i realized u were makin them outta orgami paper so yeah lol

author
hedge98hog (author)2010-03-11

I made one but the squares where from full sheets of paper so the overall star was huge!

author
Andrew15 (author)2009-04-19

There are more than 15 sides, around 26 or 27.

author
Player 1 (author)Andrew152009-04-20

?? um... ?? actually i dunno where u learned to count, but where i live 15 is 15...

author
Near24 (author)Player 12010-03-05

 ya, same here, 15 is 15, not 14 is 15

author
randomguy96 (author)Andrew152009-05-19

I think he means points

author
ntthuhang03 (author)2009-07-28

15 sided ninja star !!! I have successfully finished one. It looks very very nice! I like it very much. I will introduce to my students and I'm sure that will be very happy, Thanks very much!

author
fastlines49s (author)ntthuhang032009-12-30

you can make it stronger by adding coffee straws to the fold of each point

author
michaeleoni (author)ntthuhang032009-12-18

spit,grit,and a hole lot of duck tape.

author
G_ster9o9 (author)2009-11-20

Dude, its awesome, it dosen't look right though, stiil, it barely flies, but any way, good work =)

author
aggieboys12 (author)2009-05-06

cool but i wish it would stay together easyer

author
smith94 (author)aggieboys122009-11-19

use tape or staples thats what i did 

author
Joby-1-knoby (author)2009-10-03

It took me a while but its awesome. can it fly?

author
kzl4znboii (author)2009-06-06

how manyy points depends on how you space them

author
iSkate2Day (author)2009-05-30

There is Definitely 14 points on the star above. Cool work though!

author
King doom64 (author)2009-05-07

Nice man, i made this and it was awesome, first i got it. It breaks a lot but i put tape on mine so it stays together and flies. I mighta added weight to it(bigger paper, add-ons what not). It was actually very easy, i make it at school, show it off to meh friends. Usually takes me around 15 mins. This is a nice design, and your getting this comment from an expert. ☼☼☼☼☼(Stars). P.S. I wish my friend was sharp like me, hes seriously mental.

author
tatsugandragon (author)2009-04-09

cool

author
seanster97 (author)2009-03-14

fun to do this while listenen to Guns N' Roses

author
SupaPheoniX (author)2008-10-28

Its fuken mad, i made a large one 15 A4 papers.

author
wetselonehundred (author)2008-10-25

very nice i made one it took me a long time though realy cool

author
undeadman76 (author)2008-10-15

awsome i think your ninja star or some1 elses idea is realy realy awsome but i made 1 the had 14 and it was c::l(cool)

author
Cthulu (author)2008-10-11

I just built this thing and it rocks. Good job!

About This Instructable

16,278views

23favorites

License:

More by Player 1:MEtal Wire KeychainMetal Designed PlateMini Ballpoint Pen
Add instructable to: