Instructables
loading
loading
Picture of 2 Minute Mini Flashlight
SAM_2712.JPG
- Empty Lead Refill box
- Wire
- 3 LED's
- 2032 Battery
- Reset Button

 
Remove these adsRemove these ads by Signing Up

Step 1: Connecting LED's, Switch and Battery

Picture of Connecting LED's, Switch and Battery
SAM_2714.JPG
SAM_2715.JPG
First, I connected leds in parallels. Then open groove in the bottom of the container, next i run the wire through the container and make final connections.(Tape down everything)

Step 2: Test Results

Picture of Test Results
I think that it have good performance. Now, You decide...