Print PDF
Favorite
Email
Step 6The Fan
Cut the light fixture at the top. cram inside the "blowhole" of the fan.
Using the hack-saw, make a 1in long "V" cut in the pipe appx. 10-12in from the top.
Put the long end in the fan, and put the other end in the forge(I did this before I adhered the Quickcrete).
Using the hack-saw, make a 1in long "V" cut in the pipe appx. 10-12in from the top.
Put the long end in the fan, and put the other end in the forge(I did this before I adhered the Quickcrete).
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
