Introduction: 2 in 1 Air Changer (air Cooler or Air Freshener)

Picture of 2 in 1 Air Changer (air Cooler or Air Freshener)

hi friends today i wil show you how to make 2 in 1 air quality changer machine

Step 1: Step - 1 = Collect All Things We Need

Picture of Step - 1 = Collect All Things We Need

A) electronic parts.

1) - 9v. battery with connector - available at electronic store or amazon

2) - switch - available at electronic store or amazon

3) - 3v. or 12v. dc motor - available at electronic store or amazon

4) - wires (if need) - available at electronic store or amazon

B) waste or normal parts.

1) cylinder type jar. (1.5 L.)

2) plastic water bottle (500 ml to 1 L. )

3) knife (if you don't have solder machine)

4) candle (if you not have electric solder or glue gun machine)

C) EXTRA MATERIALS

1) double side tape

2) electric safe tape

3) glue gun with glue stick

4) solder.

Step 2: STEP 2 - MAKING JAR COMPATIBLE FOR WORK

hello friends today i will say how to make 2 in 1 air quality changer.

so let's start, first take jar with lid, on his lid make small small holes by using solder machine or by knife (by heating top part) then cut the middle part of waste plastic bottle. after that in middle of jar of front side mark a middle part of bottle size and cut that part of jar. Then in center of lid mark measurement of motor and cut that part.

now insert the motor in the cutted part of lid and fit it by using glue gun and then cover the glue added part by cellotape. after this fit the middle part of bottle to the cutted part of jar . then connect the motor to battery as follows

1) battery - to motor - 2) battery + to switch 3) motor + to switch

And test the circuit it will work.

Then attach the switch to lid by using double tape.

make a battery carrier by using waste cardboard to handle the battery

Step 3: STEP 3 - MAKING TWO WORK IN ONE

for air cooler steps as follows

1) Add the ice in the jar and just on the switch and ENJOY !

For air freshner steps as follows

1) Add the deo or scent liquid by spraying in jar and on the switch and ENJOY !

if you want to make glue gun and solder machine link is given below

we have also youtube channel named - W.L.G. PRODUCTIONS TECH TRICK

please like our videos and subscribe our channel.

1) glue gun -

2) solder machine -

Comments

Swansong (author)2017-02-24

Thanks for sharing :)

About This Instructable

156views

1favorite

Bio: hi,my name is hraday sadrani. I am school going boy but i like science projects,electric project or arduino project. I have my youtube ... More »
More by DangerMiner:RECHARGEABLE POWER BANK WITH DISPLAYPower Bank Under Rs. 33 Only 2 in 1 air changer (air cooler or air freshener)
Add instructable to: