Print PDF
Favorite
Email
Step 7Glue and Screw.
Glue down the wooden board with the sealant making sure that it's lined up properly with the holes we've drilled., then go ahead and put the lid and board back onto the fridge and pass the 10-24 screws through the entire thing and make sure everything fits fine.
Next we'll pass the screws up through the fridge with a washer in place to make sure we don't overly damage the plastic, up through the top and we can then set the tower in place. Go ahead and pass the tubes from the tower down into the fridge and then attach the tower to the screws using the acorn nuts. Happily the screws are just the right length with the nuts to make a nice clean finished look.
Next we'll pass the screws up through the fridge with a washer in place to make sure we don't overly damage the plastic, up through the top and we can then set the tower in place. Go ahead and pass the tubes from the tower down into the fridge and then attach the tower to the screws using the acorn nuts. Happily the screws are just the right length with the nuts to make a nice clean finished look.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
