Print PDF
Favorite
Email
Step 2Tools
Now I tried to build this with the bare necessities so I could show you that it is possible to
make a cnc machine with very little.
Required Tools:
Drill
Screw drivers
Tap and Die set
Rotary tool
Hack saw
Vise or some form of clamping device
Pliers
Drill bits
File
Center punch
Recommended Tools:
Band saw
Table saw
Lathe
Bench grinder
Bolt cutters
make a cnc machine with very little.
Required Tools:
Drill
Screw drivers
Tap and Die set
Rotary tool
Hack saw
Vise or some form of clamping device
Pliers
Drill bits
File
Center punch
Recommended Tools:
Band saw
Table saw
Lathe
Bench grinder
Bolt cutters
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
2
Jun 12, 2011. 5:58 PMimBobertRobert
says:
sorry but im not good with tools. what is a tap and die set?
Reply
Jun 12, 2011. 6:08 PMasteidl
says:
A tap is a tool used to create screw threads (like on a bolt) on the inside of a hole. A die is a tool used to create threads on the outside of a rod. Often times taps and dies are sold together, along with a handle to turn them. Link: http://en.wikipedia.org/wiki/Tap_and_die
Reply
2
Jun 12, 2011. 6:10 PMimBobertRobert
says:
that clears up alot! thanks!
Reply
 |
Add Comment
|
