Introduction: 2.0 Speaker Using PVC Pipe | Homemade

Picture of 2.0 Speaker Using PVC Pipe | Homemade

In this instructables i will show you how to make speaker using PVC pipe.

Please vote for this project for the contest by clicking the VOTE button on the right hand top corner

Step 1: Making Video

Pleases subscribe to my YouTube Channel for more :

Speaker Testing Begins @ 4:45

Step 2: Things Required

Picture of Things Required

1. PVC Pipe (Length = 16.5 cm & Diameter = 6 cm) - 2

2. Speaker - 2

3. Video Cable

4. Back Disc to cover the back of PVC pipe - 2

5. White Cloth

6. Spray Paint

7. Soldering Rod, Soldering Wire, Soldering Paste & Stripper

8. Scissor

9. Hot Glue gun

10. Insulation Tape

Step 3: Wiring

Picture of Wiring

Connect the video cable wires to the speaker and insulate the wires to protect from short.

Step 4: PVC Pipe - Front

Picture of PVC Pipe - Front

After connecting the wires Glue the speaker to the PVC pipe using hot glue as shown in the images

Step 5: PVC Pipe - Back

Picture of PVC Pipe - Back

Now take the round disc and glue it to the back side of the PVC pipe as shown in the images

Step 6: Painting

Picture of Painting

Now paint the PVC Pipes to give it a good look.

Step 7: Finishing

Picture of Finishing

Now cover the front/Speaker with the cloth and tape it and remove the extra cloth.

Please CLICK HERE to watch Complete Video & Testing. Testing Begins @ 4:45


If you want to support my projects please purchase things from my Amazon Store. This way I get a small commission which will help me produce more videos. Please use the link to visit my store :


Also pleases subscribe to my YouTube Channel for more :



About This Instructable




Bio: I like making new things from trash. For more cool content please subscribe to my YouTube channel @
More by MakeStuff_MS:How to Make a Professional Looking Proximity Sensor Running LED | LED Chaser or Sequencer Using 555 & 4017+12/-12 Volt Transformer Based Dual  Voltage Power Supply
Add instructable to: