loading
My old shift boot on my 2005 Mustang was worn out.  The boot had some rips and torn seams so it was time to replace it.  I picked up a generic replacement on eBay for about $10.  Installation was pretty simple, but did require some trimming and cutting some new slits for the plastic frame to grab.  The original shift knob was used but required a hose clamp to hold the Alcantara cloth on.  Overall a cheap way to replace the boot.

Thanks for watching.

About This Instructable

838views

3favorites

License:

More by stangtime:DIY Pine Bird Feeder - a CNC Project Perfect Box Joints - on a Small CNC Big Phone Dash Mount 
Add instructable to: