loading
Picture of 2010 POWERPOINT PROJECTS: FACES
HI EVERYBODY! I AM DENSITY  AND I AM 14 YEARS OLD. HAVE YOU EVER WONDERED HOW TO CREATE COOL THINGS ON THE COMPUTER LIKE ANIMATIONS AND OBJECTS. I CAN SHOW YOU HOW TO MAKE THE BEST OBJECTS, WEAPONS, FACES, ANIMATIONS AND ALL SORTS OF THINGS ON POWER POINT 2010. I LEARNT HOW TO USE POWER POINT AND HOW TO MAKE THESE THINGS ON MY OWN. IT IS NOT THAT DIFFICULT BUT TAKES PRACTICE. IN THIS INSTRUCTABLE, I WILL SHOW YOU HOW TO MAKE FACES WITH DIFFERENT EXPRESSIONS, LOOKS AND ATTITUDES. YOU DON'T HAVE TO FOLLOW THESE EXACT STEPS. YOU CAN DECIDE THE PROPORTION, SIZE AND FRANKLY WHAT YOU THINK LOOKS BETTER. I HOPE YOU ENJOY IT!
 
Remove these adsRemove these ads by Signing Up

Step 1: GETTING FAMILIAR WITH POWER POINT 2010

THESE ARE JUST SOME BASIC USES OF THE TOOLBAR AND FORMATING TOOLS. BEFORE YOU START MAKING THINGS, IT IS BETTER TO PRACTICE AND TRY ALL THESE TOOLS AND BECOME FAMILIAR WITH HOW THEY WORK. THE MORE YOU KNOW HOW TO USE THEM, THE BETTER YOUR ANIMATION WILL LOOK. SO READ ABOUT THESE  ACTONS AND GET A BETTER UNDERSTANDING OF THEIR USES.

Step 2: PARTS

Picture of PARTS
THESE ARE ALL THE PARTS YOU WILL NEED TO MAKE THE POWER POINT FACE. YOU WILL LEARN HOW TO MAKE THEM AND HOW TO PUT THEM TOGETHER.

Step 3: HOW TO EDIT A SHAPE

WE ARE GOING TO MAKE THE CHIN OUT OF A TRAPEZOID. YOU START OF BY PICKING THE TRAPEZOID UNDER SHAPES. TO ROTATE A SHAPE, SELECT THE SHAPE AND HOLD THE LITTLE GREEN CIRCLE AT THE TOP OF THE SHAPE (IMAGE 2). THEN ROTATE THE GREEN CIRCLE UNTIL THE SHAPE IS IN YOUR DESIRED DIRECTION (IMAGE 3). ONCE THE TRAPEZOID IS FACING DOWN, WE MUST INLARGE IT. SELECT THE SHAPE AND GRAB THE LITTLE WHITE CIRCLE AT THE TOP RIGHT CORNER OF THE TRAPEZOID, AND PULL IT UNTIL IT IS AT THE RIGHT SIZE (IMAGE 4). RIGHT CLICK ON THE SHAPE AND SELECT "EDIT POINTS" (IMAGE 6). THIS WILL ALLOW YOU TO CHANGE THE SHAPE AND ITS CORNERS. HOLD ONTO THE LITTLE BLACK SQUARE AT THE BOTTOM CORNER AND PULL IT INWARDS TO MAKE THE SIDE SMALLER (IMAGE 7). ONCE YOU GET THE SHAPE IN IMAGE 8, CLICK ON THE TOP LEFT BLACK SQUARE. 2 LITTLE WHITE SQUARES WILL APPEAR ON EITHER SIDES OF THE BLACK SQUARE. HOLD THE LOWER WHITE SQUARE AND MAKE IT AROUND 88 DEGREES FROM THE TOP OF THE SHAPE (IMAGE 9). RIGHT CLICK ON THE SHAPE AND PICK "FORMAT SHAPE" AT THE BOTTOM (IMAGE 10). THEN CLICK ON "FILL" AND THEN CLICK ON "COLOUR". THEN PICK "MORE COLOURS" (IMAGE 11). PICK CUSTOM AND FILL IN THESE NUMBERS WHERE IT SAYS RED, GREEN AND BLUE:     RED-252     GREEN-223      BLUE-166. YOU CAN CHANGE THE COLOUR BY TRYING OUT DIFFERENT COMBINATIONS AND CHOOSE WHICH COLOURS YOU LIKE THE BEST. IT WOULD LOOK SOMETHING LIKE IMAGE 12.

Step 4: TOP OF THE HEAD

Picture of TOP OF THE HEAD
24.jpg
777.jpg
NOW LETS MAKE THE CENTER AND TOP OF THE HEAD. IT IS VERY SIMPLE, ALL IT CONSISTS OF IS A RECTANGLE AND AN OVAL. SELECT AN OVAL FROM SHAPES AND FLATTEN THE OVAL. THEN SELECT A RECTANGLE AND MAKE IT SO THAT IT IS THE SAME LENGTH AS THE OVAL. YOU CAN CHANGE THE SIZE AND FORM OF THE SHAPE TO MAKE THEM FIT.

Step 5: FORMING THE HEAD

Picture of FORMING THE HEAD
888.jpg
999.jpg
1000.jpg
26.jpg
NOW THAT WE HAVE ALL THE PARTS NEEDED TO MAKE HIS HEAD, WE JUST NEED TO PUT THEM TOGETHER. PLACE THE OVAL AT THE TOP, AND UNDERNEATH IT, PLACE THE RECTANGLE AND AT THE BOTTOM PLACE THE CHIN. YOU CAN ALTER THE FORM OR SIZE OF THE SHAPES SO THAT THEY FIT PERFECTLY. NOW WE MUST GROUP THE SHAPES. HIGHLIGHT OR SELCT ALL THE SHAPES AND RIGHT CLICK ON ONE OF THEM. MOVE YOUR MOUSE OVER "GROUP" AND THEN PICK "GROUP" (IMAGE 2). NOW THAT WE HAVE ONE SHAPE, LETS REMOVE THE LINES. RIGHT CLICK ON THE HEAD AND SELECT "FORMAT SHAPE" (IMAGE 3). THEN SELECT "LINE COLOUR" AND CLICK ON "NO LINE" (IMAGE 4). THAT WILL REMOVE THE LINES TO MAKE IT LOOK LIKE 1 SHAPE. IT WOULD LOOK SOMETHING LIKE IMAGE 5.

Step 6: EYES AND MOUTH

NOW TO MAKE THE EYES. WE WILL MAKE THE EYES OUT OF A FREEFORM LINE. GO TO SHAPES AND SELECT FREEFORM UNDER THE HEADING LINES (IMAGE 1). TO MAKE A SHAPE; CLICK ON A SPACE, MOVE YOUR MOUSE AND CLICK AGAIN (IMAGE 2 AND 3). THIS WILL MAKE A LINE. CONTINUE CLICKING UNTIL YOU GET A SHAPE LIKE IMAGE 4. TO CLOSE THE SHAPE, CLICK ON THE FIRST POINT YOU STARTED WITH. IF YOU WANT, YOU CAN CREATE A CURVE IN THE LINES TO MAKE IT LOOK MORE REALISTIC (IMAGE 5). ONCE AGAIN; YOU SELECT EDIT POINTS, CLICK ON THE BLACK SQUARE, HOLD AND MOVE THE WHITE SQUARE AROUND TO GET THE DESIRED CURVE. NOW WE WILL MAKE THE PUPIL OR THE CENTRE OF THE EYE. SELECT AN OVAL, AND TO MAKE IT MORE INTERESTING YOU CAN CHANGE THE COLOUR OF THE EYE. IT IS YOUR DECISION. TO MAKE IT MORE REALISTIC, YOU CAN ADD A SMALLER OVAL IN THE MIDDLE OF THE PUPIL AND GROUP THEM TOGETHER (IMAGE 7). PLACE THE PUPIL IN THE EYE AND GROUP THEM. YOU CAN PUT THE PUPIL IN DIFFERENT POSITIONS OF THE EYE TO MAKE IT SEEM LIKE HE IS LOOKING IN DIFFERENT DIRECTIONS. IN ORDER TO MAKE 2 EYES, COPY AND PASTE IT. SELECT THE SECOND EYE AND HOLD ON THE WHITE, MIDDLE SQUARE ON THE LEFT SIDE AND MOVE IT TO THE RIGHT UNTIL IT STARTS APEARING LIKE A REFLECTION (IMAGE 8). ONCE YOU HAVE AN OPPISITE IMAGE OF AN EYE, RESIZE IT SO IT BECOMES IDENTICLE TO THE OTHER EYE. PLACE THE EYES ON THE HEAD AND POSITION THEM TO YOUR LIKING. YOU CAN CHOOSE IF HE HAS A HIGH, LOW OR CENTRE EYE PLACEMENT. GROUP THE HEAD AND THE EYES TOGETHER.

Step 7: NOSE

TO MAKE THE NOSE, WE WILL USE A CURVE. GO TO SHAPES AND SELCT CURVE UNDER THE HEADING LINES (IMAGE 1). THE CURVE MAKES A LINE WITH A BEND IN IT. IT WORKS SIMILAR TO THE FREEFORM, BUT EXEPT OF CORNERS, YOU GET CURVES. YOU CLICK ON ONE PLACE AND THEN CLICK SOMEWHERE ELSE. WHEN YOU CLICK THE THIRD TIME, THE SECOND POINT WILL CREATE A BEND OR CURVE (IMAGE 2). PRACTICE MAKING CURVES UNTIL YOU ARE FAMILIAR AND ACCURATE WITH BUILDING AND CONSTRUCTING THEM. ONCE YOU CAN MAKE CURVES, TRY AND MAKE THE CURVES IN IMAGE 3. GUIDES ON MAKING THE CURVES ARE IN IMAGE 4. ONCE YOU HAVE ALL YOUR CURVES, PLACE THEM TOGETHER SO IT RESEMBLES A NOSE (IMAGE 5). THEN GROUP ALL THE CURVES TOGETHER (IMAGES 6 AND 7). PLACE THE NOSE ON THE FACE AND POSITION IT WHERE YOU FEEL IS BEST. GROUP THE NOSE AND FACE TOGETHER. TO MAKE THE MOUTH YOU JUST NEED ONE LINE. YOU CAN EITHER MAKE A STRAIGHT LINE OR YOU CAN MAKE A CURVE TO SHOW HAPPINESS OR SADNESS. PLACE IT ON THE FACE AND GROUP THEM.

Step 8: EARS

Picture of EARS
1900.jpg
34.jpg
WHAT IS A PERSON WITHOUT EARS? THE EARS ARE MADE OUT OF CURVES AND FREEFORMS. TO MAKE THE EAR ITSELF, USE A FREEFORM LINE (IMAGE 1). CHANGE THE COLOUR OF THE EAR TO:    RED-252    GREEN-223     BLUE-166     OR TO WHAT COLOUR YOU USED TO MAKE THE HEAD. TO MAKE THE GROOVES AND DETAIL IN THE EAR, USE CURVE LINES (IMAGE 2). PLACE THE CURVES IN THE EAR AND GROUP THEM. DUPLICATE THE EAR BY COPYING IT AND MAKING A REFLECTION OF IT LIKE IN STEP 6 IMAGE 7. PLACE THE EARS ON THE HEAD AND GROUP THEM TOGETHER.

Step 9: DETAILS

Picture of DETAILS
2000.jpg
36.jpg
2100.jpg
1400.jpg
NOW TO ADD DETAILS. YOU CAN MAKE THE FOLLOWING CURVES TO ADD DIMPLES, CHEEK BONES, EYEBROWS AND PHILTRUM (DENT BETWEEN YOUR NOSE AND YOUR TOP LIP). TO MAKE THE EYEBROW, MAKE THE CURVES AND JOIN THE LAST POINT TO THE FIRST POINT (IMAGE 2). DUPLICATE THE DIMPLE AND THE EYEBROW LIKE IN STEP 6 IMAGE 7. FILL THE EYEBROW WITH WHAT COLOUR YOU WANT. THE PHILTRUM IS MADE OUT OF AN OVAL. MAKE THE COLOUR OF THE OVAL BLACK. GO TO FORMAT SHAPE AND SELECT FILL THEN SOLID FILL. AT THE BOTTOM THERE IS A TRANSPARENCY METER (IMAGE 4). MAKE THE TRANSPARENCY OF THE SHAPE 93 PERCENT. REMOVE THE OUTLINE. PLACE ALL THE DETAILS ON THE FACE AND GROUP THEM (IMAGE 5).

Step 10: EXPRESSION AND ACCESORIES

Picture of EXPRESSION AND ACCESORIES
41.jpg
39.jpg
40.jpg
43.jpg
42.jpg
ONCE YOU HAVE MADE YOUR FACE, FEEL FREE TO EXPERIMENT BY MOVING AROUND HIS EYEBROWS, CHANGE HIS MOUTH OR HIS EYES. CHANGE THE COLOUR OF HIS SKIN. DO WHATEVER YOU WANT AND MAKE HIM LOOK LIKE HOW YOU WANT HIM. ONCE YOU ARE FAMILIAR WITH POWER POINT, USE YOUR IMAGINATION AND CREATE ACCESORIES LIKE GLASSES, HATS AND EARINGS. MAKE YOUR CHARACTER UNIQUE BY ADDING SCARS OR MARKS. DON'T STOP AT THIS FACE. THIS IS JUST A STARTING POINT FOR UNIQUE, INTERESTING AND CREATIVE FACES.

Step 11: PROJECTS

Picture of PROJECTS
THANK YOU VERY MUCH FOR CHECKING OUT MY INSTRUCTABLE. I HOPE YOU FOUND IT USEFUL AND THAT IT WAS NOT DIFFICULT TO UNDERSTAND. PLEASE LEAVE COMMENTS IF YOU DON'T UNDERSTAND SOMETHING AND I WILL BE GLAD TO REPLY IN THE MOST USEFUL WAY AS I CAN. TELL ME IF THERE IS SOMETHING I CAN ADD AND WHAT YOU WOULD LIKE TO KNOW HOW TO MAKE ON POWER POINT. NEXT TIME I WILL SHOW YOU HOW TO MAKE WEAPONS AND LATER ON I CAN EVEN TEACH YOU HOW TO MAKE MOVEMENTS AND ACTIONS ON POWERPOINT 2010. THANK YOU VERY MUCH AND HOPE YOU CHECK OUT THE REST OF MY TUTORIALS THAT ARE COMING SOON! PLEASE CHECK OUT MY INSTRUCTABLE AT: http://www.instructables.com/id/LEGO-USB-2/
NXTHacker2 years ago
Just a small question,
why are you spending all this time creating a face when you can just go to clip art and insert one?
Density (author)  NXTHacker2 years ago
I FIND IT BETTER TO MAKE YOUR OWN THINGS. THAT WAY YOU CAN CHOOSE HOW TO MAKE HIM LOOK. YOU GET MORE OPTIONS AND CHOICES INSTEAD OF AN ALREADY MADE OBJECT THAT YOU CAN NOT CHANGE.
right:)
Density (author)  NXTHacker2 years ago
YOU CAN ALSO MAKE HIM HAVE EXPRESSIONS.