Instructables
loading
loading
Picture of 25 Caliber K'nex Assault Rifle/ AR25
25 Caliber K'nex Assault Rifle aka AR25

I AM NOT LIABLE FOR ANYTHING YOU DO

My first k'nex gun so criticize all you want =D
Only person that knew I was working on this was DSman195276

Stats:
50-60 feet average with one long rubber band this thick (the underscore)_
12 red rod round mag
true trigger
Modded orange connecter with a tab missing
4 Modded grey connecters or 2 orange connecters cut in half
Dsman195276's Modded DD27 Barrel- Link
T3Hprogrammer's YAKG Trigger- link
 
Remove these adsRemove these ads by Signing Up

Step 1: Hopper Entry Barrel

Picture of Hopper Entry Barrel
Pretty Straight Forward look at notes

Step 2: The Modded Frictionless Barrel

Picture of The Modded Frictionless Barrel
IMG_1866.JPG
IMG_1865.JPG
IMG_1863.JPG
IMG_1862.JPG
IMG_1859.JPG
Look at notes and you should be fine.

Step 3: Add's accuracy and good looks

Picture of Add's accuracy and good looks
IMG_1871.JPG
IMG_1878.JPG
IMG_1881.JPG
IMG_1885.JPG
Look at notes.

Step 4: Handle

Picture of Handle
IMG_1844.JPG
IMG_1845.JPG
IMG_1846.JPG
Really comfty and self explanatory

Step 5: The Strenght and looks extension+foregrip

Picture of The Strenght and looks extension+foregrip
IMG_1849.JPG
IMG_1850.JPG
IMG_1852.JPG
IMG_1855.JPG
IMG_1856.JPG
Really Really Recommended

Step 6: La Hopper

Picture of La Hopper
IMG_1892.JPG
IMG_1894.JPG
IMG_1896.JPG
12 Green/red rods for ammo

Step 7: Not Many pictures of Trigger

Picture of Not Many pictures of Trigger
IMG_1887.JPG
IMG_1889.JPG
More on YAKG on this link

Step 8: Almost Forgot, Ramrod

Picture of Almost Forgot, Ramrod
If you can't build this and got this far... ouch

Step 9: Connect it all

Picture of Connect it all
The numbers are the steps
1-40 of 87Next »
Not bad.
yodoggie3 years ago
good thing your not liable for a gun that WONT SHOOT
Looks flimsy, but filled with raw power.
99igo4 years ago
Are the little horizontal connectors nessasary
prodo1235 years ago
Different materials are used in different rods. Black rods are a bit heavier and stiffer than normal gray rods, same goes for tan rods and red rods.
nala beamer5 years ago
i like doughnuts and what are those black things u put in the middle of step 1?
Doctor Who (author)  nala beamer5 years ago
those are orange/brown 2 slot horizontal connectors sliced in half
 I have a Black Long Rod like that :D
KnexFreek5 years ago
 Hey doctor who!  I like this gun i five stared it and subscribed! Will you check out my stuff? Thankyou!
Doctor Who (author) 5 years ago
they have some carbon fiber in it while the orange ones and gray ones are pure plastic
stimky6665 years ago
Are the black rods really made of carbon fiber?
I've always wondered why they were stronger.

What about the orange ones?
0.5 stars, because you are cheating. You just destroy pieces.
you dont need destroyed parts to make this gun. it deserves a 3.5
Hmmm... It is just a AST Rifle ripoff, really. The only things that are different is: -Worser handle -Worser barrel -Better trigger
"worser" is not really a word 
yeah and 3.5 suggests that it is "good" which this gun clearly is not.
True.
ILIKEPIE3335 years ago
grey rods are more like .50 calibre
stopanator6 years ago
you copied this from bundrak
psharpep6 years ago
Haha you say "I'm not responsible for anything you do with this" but to be honest, there's not much we can do with this anyway lol
nerfer6 years ago
i hate this gun!! do not build it!! i am speaking from persinal experience!!

small letters are fun letters
I don't like the gun sorry
the gun is not stabel
DJ Radio6 years ago
ok, 2 notes. 1. The handle is from Frozenfire99's spider massacre v2. you should give credit to him 2. Looks a lot like crestind's AST rifle, but it does have a lot of differences. 4*
*Keyword* LOOKS =) good suggestions!
Looks like crestinds AST rifle...
bullet-head6 years ago
nice hopper!
whats a hopper i dont know LOL
That is a magazine that only works on gravity. If there is no gravity in the place where you are using it, you must have a rod pusher, that pushes the rods down to the barrel.
otrop1856 years ago
i'm still not gettin you! tell me from left to right what connectors you put on the middle rod.
Doctor Who (author)  otrop1856 years ago
snowflake,gray spacer,an orange connecter chopped in half, gray spacer,gray spacer,an orange connecter chopped in half, gray spacer,gray spacer, gray spacer, gray spacer,an orange connecter chopped in half,gray spacer, gray spacer, gray spacer, an orange connecter chopped in half, gray spacer, 3 donuts or gray spacer, snowflake, 2 donuts,yellow connecter 2 donuts, yellow connecter
lol doughnuts ooooooo ooooooooo ooooooooooo ooooo ooooo oooooo oooooo ooooooooooooo ooooooooooo ooooooooo ooooooo
Master_Zane6 years ago
Well, I did all of the steps but it's only shooting like 5 feet. Help?
Doctor Who (author)  Master_Zane6 years ago
ok, where did you put the rubber bands and is the magazine built right?
Sorry too late. Took it apart already.
Doctor Who (author)  Master_Zane6 years ago
can you send me a picture of your gun?
Looks like a heavily modded AST rifle from crestind...
Skreetsha6 years ago
why is this so high rated? not that im saying it isnt good its just that it looks a bit flimsy
Doctor Who (author)  Skreetsha6 years ago
its a decent low piece gun, the front is a little flimsy so shorten it by like 2 sections if you don't like flimsiness. Its a strong gun overall.
well if youre looking for something durable, try my assualt rifle
1-40 of 87Next »