In this instructable I will show how to create and build your very own 250mm Quadcopter for right about 200USD.

Step 1: The Build

In this build I have included links to the following items that I used:

iMAX B6 OEM Battery Balance Charger For 1-6 cell Lipo, Li-ion, LiFe (A123), Pb, 1-15 cells NiCd and NiMH Batteries http://www.amazon.com/Battery-Balance-Charger-Li-i...

Lumenier LUM-1300-3-35 1300mAh 3s 35c Lipo Battery (XT60) http://www.amazon.com/Lumenier-LUM-1300-3-35-1300m...

UsmileĀ® Baseflight Naze 32 Acro Naze32 6DOF rev5 Flight Controller for Mini quad fpv http://www.amazon.com/Usmile%C2%AE-Baseflight-Naze...

FlySky 2.4GHz 6 Channel Digital Transmitter and Receiver Radio System http://www.amazon.com/FlySky-Channel-Digital-Trans...

US Shipped Cheap Drones XT60 Connectors 5 Pairs (5 Male + 5 Female) - Amazon Prime Shipping http://www.amazon.com/Shipped-Cheap-Drones-Connect...

LHI 250 mm Quadcopter Race Copter Frame Kit ARF+ CC3D Flight Controller + MT2204 2300KV Motor + Simonk 12A ESC + 5030 propeller http://www.amazon.com/LHI-Quadcopter-Copter-Contro...

Step 2: Final Touches

This will be the final of the build videos. I will complete the build and show what it all looks like when it is over.

usb drivers https://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx

download configure app https://chrome.google.com/webstore/detail/baseflight-configurator/mppkgnedeapfejgfimkdoninnofofigk?hl=en

Step 3: Flight Time!!!

In this video I will be flying the quadcopter that I built. Enjoy the demo.

Support the channel tip with bitcoins Address: 1MvcZHRbDm9czS8s776iutBBPJ39K4PEHh
Follow me on youtube: http://www.youtube.com/misperry

Follow me on Twitter http://www.youtube.com/misperry

T-Shirts http://www.youtube.com/misperry

About This Instructable




More by misperry:Hosting Https for AlexaPi Custom Skill Custom AlexaPi Skill Setup Home Assistant on Raspberry Pi 
Add instructable to: