3 Simple Ways to
Share What You Make

With Instructables you can share what you make with the world — and tap into an ever-growing community of creative experts.

PhotosPhotos

Share one or more photos of a project, recipe, or whatever you've made, quickly and easily.

Step by StepStep-By-Step

Share your step-by-step photos with text instructions of what you made so others can do it too!

VideoVideo

Share your how-to video. You'll need your embed code from a video site such as YouTube.

3 Axis CNC Router - 60"x60"x5" - JunkBot

Step 4The driver board and box - cooling overkill.

The driver board and box - cooling overkill.
«
  • cncControlBox1.jpg
  • cncControlBox3_fans.jpg
  • cncControlBox2.jpg
This box has a few too many fans. At the time I was unsure of how hot this was going to run, so I decided to error on the side of overkill - I think 4 fans is enough.

With the execption of the xylotex driver board and power supply, everything in this assembly was fabricated or from a recycled source.
« Previous StepDownload PDFView All StepsNext Step »
2 comments
Apr 2, 2008. 9:15 AMeagleeyes1963 says:
cool do you sale the plans for this cnc machine
Sep 15, 2010. 5:16 PM69fordf100 says:
i've seen a similar machine at http://bluumaxcnc.homestead.com/Gantry-Setup.html.
I so want to build these. time to hit the lottery!!!! come on numbers!!!

Pro

Get More Out of Instructables

Already have an Account?

close

All Steps Viewing
View all steps of an Instructable on the same page when you're a Pro Member.

Upgrade to Pro today!
47
Followers
1
Author:russaanderson