Step 6: Time to Drill
So now that you have decided where to put your connections at. It's time to drill the holes.
Take your Brass Nipples and find a drill bit that just barely fits inside it. If you are building your to my specifications then you will need a 3/8th bit.
Once you drill the hole, you are going to have to wiggle the drill while its running to widen the hole just enough to barely squeeze the nipple through.
Take your Brass Nipples and find a drill bit that just barely fits inside it. If you are building your to my specifications then you will need a 3/8th bit.
Once you drill the hole, you are going to have to wiggle the drill while its running to widen the hole just enough to barely squeeze the nipple through.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
